|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
|
Thread Tools | Display Modes |
|
|
04-01-2008, 01:38 PM
|
#1 | |
|
rotors excite me
Join Date: Mar 2008
Location: Iowa
Posts: 372
Rep Power: 18  |
http://www.rotorwiki.com/index.php/TPS_Adjustment
Make sure you use the S5 instructions. Your TPS could be bad, and a reading of '1', with the 1 being all the way to the left of the multimeter screen, means that the resistance is either infinite (meaning no continuity, no connection) or you are using too low of a setting. If it's '1' all the way to the right then you are probably using too high of a setting on the meter and you should turn it down until you get a non-one reading or you are as low as it will read.
__________________
He isn't a killer. He just wins -- thoroughly.   '87 TII 240+ rwhp on my DIY streetport, ~13psi on stock turbo, Racing Beat REVTII exhaust  rTek 2.1 awaits a tune Quote:
|
|
|
|
|
04-01-2008, 10:00 PM
|
#2 |
|
The Newbie
Join Date: Mar 2008
Posts: 11
Rep Power: 0 |
.
Last edited by FRFC3S; 09-10-2020 at 02:35 AM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
