PARTING OUT: 93 Single Turbo Set up

rx7man1993 · 08-26-2010, 12:42 AM

UPDATE:

PRICE DROPS!!!

My paypal addy is: e_money@excite.com
Prices are with shipping unless other wise said.

Short block - $1700k app : 5k miles +SHIPPING

The engine was rebuilt by Banzai Racing a little over a year ago. It was street ported, has 88 TII lower compression rotors and matching wieghts. It is 2mm seals. Sorry there is no warranty as Banzai only gives a year warranty with their rebuilds. But there is only around 5k miles on it, as I never got the tune done and so it was only boosted during a base tune and a short retune session by Chris at Banzai. So it is ready to go and all broke in. It compression tested in the high 90's on each rotor face.

Greddy front strut mount bar - $80 Pending

5 Speed Transmission w/newer 5 gear sync - $375+SHIPPING Pending
comes with short shifter.

XTR 6 puck clutch - $200
lightweight flywheel - $100
Or $275 together

E8 Haltech ECU with fling lead, WB 02 sensor and gauge - $1100
Or
$800 for ECU
$200 for sensor and gauge.
$200 for Flying lead (wire harness)

LT8 Microtech with new wiring harness - $775

LS1 coils,8mm plugs wires, 3 bar map - $125

Polished parts:
Acces. bracket - $50
Water Pump - $75

Subframe - $75 + SHIPPING

(polished everything)
Rare Blitz FMIC with piping - $1200 + SHIPPING
Greddy Type S BOV - $125

Koyo rad (polished) w/Hoses - $300 + SHIPPING

Rx7Store.com midpipe resonator - $225 + SHIPPING

HKS Ti CF can cat back - $300 + SHIPPING

Hi-Flow midpipe - $175 + SHIPPING

Driveshaft - $65

Solid Megan racing tie rod ends - $75

19" Stern (ADR) wheels and tires.
P275/30ZR19 Kumho Escta SPT rears 5k miles on them
P225/35ZR19 Conti Extreme DWS fronts 1k miles on them
$800 + SHIPPING

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

08-26-2010, 12:42 AM	#12
rx7man1993 The Newbie Join Date: May 2010 Location: Elkhart, Indiana Posts: 16 Rep Power: 0	UPDATE: PRICE DROPS!!! My paypal addy is: e_money@excite.com Prices are with shipping unless other wise said. Short block - $1700k app : 5k miles +SHIPPING The engine was rebuilt by Banzai Racing a little over a year ago. It was street ported, has 88 TII lower compression rotors and matching wieghts. It is 2mm seals. Sorry there is no warranty as Banzai only gives a year warranty with their rebuilds. But there is only around 5k miles on it, as I never got the tune done and so it was only boosted during a base tune and a short retune session by Chris at Banzai. So it is ready to go and all broke in. It compression tested in the high 90's on each rotor face. Greddy front strut mount bar - $80 Pending 5 Speed Transmission w/newer 5 gear sync - $375+SHIPPING Pending comes with short shifter. XTR 6 puck clutch - $200 lightweight flywheel - $100 Or $275 together E8 Haltech ECU with fling lead, WB 02 sensor and gauge - $1100 Or $800 for ECU $200 for sensor and gauge. $200 for Flying lead (wire harness) LT8 Microtech with new wiring harness - $775 LS1 coils,8mm plugs wires, 3 bar map - $125 Polished parts: Acces. bracket - $50 Water Pump - $75 Subframe - $75 + SHIPPING (polished everything) Rare Blitz FMIC with piping - $1200 + SHIPPING Greddy Type S BOV - $125 Koyo rad (polished) w/Hoses - $300 + SHIPPING Rx7Store.com midpipe resonator - $225 + SHIPPING HKS Ti CF can cat back - $300 + SHIPPING Hi-Flow midpipe - $175 + SHIPPING Driveshaft - $65 Solid Megan racing tie rod ends - $75 19" Stern (ADR) wheels and tires. P275/30ZR19 Kumho Escta SPT rears 5k miles on them P225/35ZR19 Conti Extreme DWS fronts 1k miles on them $800 + SHIPPING