Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

[helghast7]

Originally Posted by David Jerome

Helghast7, The supercharged sound is likely one of the two following issues. 1. A loose clamp on one of the couplers or 2. a loose connection on the y-pipe to turbos connection pointes. The metal gaskets will make a whining/whistling sound and the two reasons above will answer why you are not seeing boost. I have seen the factory IC pipes make this same noise when they have a tiny whole but usually it is one of hte issues above.

i no what the noise is, we put the car on the lift for a bit

although i have been having issues with my eifini 7 pipe and vaccum caps blowing off under pressure, i have yet to have any couplers on my new setup blow off, and as stated, i have the eifini y pipe, which doesnt have connections like the usdm one

but the cap issue was fixed recently thanks to brian,

the noise is actually my differential...i must have blown it doing a highway pull, and its been slowly getting worse to the point were its louder then my exhaust... and to those that have heard my car, know thats a challenge in itself

and because of that im going to put the car to sleep for the year soon, i need a break from the repairs, its just not fun right now because of it

[TitaniumTT]

Originally Posted by Nismo

Seriously, I went from my 250ish whp Stock Turbo FC, and no I am driving a 100% Stock N/A FC, even has 3 Cats, and an Air pump, it's so god damn lethargic, at least it handles well, and stops awesome, can't wait to install the 929 Booster and Master!

Yeah, I'm not going to be too trilled with the 'vert until I get the boost under the hood. Oh well, like you said, it will handle decent and stop reasonably well.

Originally Posted by project86

We'll see how you feel about that statement when my "real" project is done

It'll still suck, just suck alot more air than most other engines and thus make more power

Originally Posted by David Jerome

Helghast7, The supercharged sound is likely one of the two following issues. 1. A loose clamp on one of the couplers or 2. a loose connection on the y-pipe to turbos connection pointes. The metal gaskets will make a whining/whistling sound and the two reasons above will answer why you are not seeing boost. I have seen the factory IC pipes make this same noise when they have a tiny whole but usually it is one of hte issues above.

He's got something going fubar in his rear end. I have heard that sound before and it is pretty messed up. My personal favorite is the cat meow when shifting in a little boost when you reverse some vac lines and the turbo back-spins..... that one is awesome.

Originally Posted by Nismo

Why? Next year it's going to have a 13B-RE nestled in it's bosom, I have a REVII exhaust I would love ton install but the cat back is 3" and the cat is not... I'm just enjoying it, get back to basics, Maybe do a few track days, and be ready for next year when it will be retarded!

What are you running for a turbo/ecu in that silly little toy of yours?

Originally Posted by helghast7

i no what the noise is, we put the car on the lift for a bit

although i have been having issues with my eifini 7 pipe and vaccum caps blowing off under pressure, i have yet to have any couplers on my new setup blow off, and as stated, i have the eifini y pipe, which doesnt have connections like the usdm one

but the cap issue was fixed recently thanks to brian,

the noise is actually my differential...i must have blown it doing a highway pull, and its been slowly getting worse to the point were its louder then my exhaust... and to those that have heard my car, know thats a challenge in itself

Yeah it is......... Sounds good though, just loud

Originally Posted by helghast7

and because of that im going to put the car to sleep for the year soon, i need a break from the repairs, its just not fun right now because of it

Are you fucking kidding me man?!?!??! Seriously????? Pull the diff and see what the issue is. It could be a simple fix and if not, snatch another diff and enjoy it for the rest of the summer.... I mean damn, I have yet to enjoy my car and I'm still plugging away on her. There's at least 5 months of good driving weather left and the best 2 are yet to come! I hope to have the FC up and ready for the best weather in Oct/Nov and a few days in Dec Ya know, just in time to take it apart again

[Nismo]

Originally Posted by TitaniumTT

What are you running for a turbo/ecu in that silly little toy of yours?

Haltech E6X Not working from now til October, so I can't afford a new one, but It will happen eventually!

[helghast7]

Originally Posted by TitaniumTT

Are you fucking kidding me man?!?!??! Seriously????? Pull the diff and see what the issue is. It could be a simple fix and if not, snatch another diff and enjoy it for the rest of the summer.... I mean damn, I have yet to enjoy my car and I'm still plugging away on her. There's at least 5 months of good driving weather left and the best 2 are yet to come! I hope to have the FC up and ready for the best weather in Oct/Nov and a few days in Dec Ya know, just in time to take it apart again

i just cant do it right now, dont have the funds for anything, because if i pull it(which i was intending on doing anyways) i want to do things right, which means:

rebuild it, if possible, replace the bushings with poly ones from pettit(loves me some poly mounts)

i wana ReRemove the trans and put my unit back in because its in better condition, BUT i need new throwout and pilot bearings, i wana buy the puller/installer for that fucking pilot bearing because i hate doing it the other way

i just dont have the cash for it, its too much breaking all at once

ive had the car tuned for like 3 weeks now and havent been able to keep it running properly for over 3 days straight

secondaries, diff, trans, y-pipe

plus i really have to change the windshield since the cracks are spreading, and now i noticed the end tanks on the spoiler are starting to separate like everyone else that has my wing

if you looked at my bank account you would understand

but like i said before, i dont mind that shit breaks, you no it gives me something to do

whats killing me is that its happening all at once

so i decided to repair the fc since i have all the parts already, get her back up and running, and rotate my fd back into hybernation, back up on jackstands she goes, pull the diff out take it to work and see whats inside

[TitaniumTT]

Originally Posted by EJayCe996

Well move over, OLD MAN, because the new generation........... Is trying to see what you're doing so I can learn!

Why you snot nosed, wet behind the ear little motherfu...... ok come here and check it out

Originally Posted by helghast7

i just cant do it right now, dont have the funds for anything, because if i pull it(which i was intending on doing anyways) i want to do things right, which means:

rebuild it, if possible, replace the bushings with poly ones from pettit(loves me some poly mounts)

I don't know how expensive the poly bushings are but the bearings aren't all that expensive at all. You'd be surprised...... at least for the FC

yeah just cheched..... ~$200

Originally Posted by helghast7

i wana ReRemove the trans and put my unit back in because its in better condition, BUT i need new throwout and pilot bearings, i wana buy the puller/installer for that fucking pilot bearing because i hate doing it the other way

Pilot & T/O bearing are like $70. The removal tool can be had for $25 at auto bone and 5 minutes with a grinder and you're all set

Originally Posted by helghast7

i just dont have the cash for it, its too much breaking all at once

ive had the car tuned for like 3 weeks now and havent been able to keep it running properly for over 3 days straight

secondaries, diff, trans, y-pipe

plus i really have to change the windshield since the cracks are spreading, and now i noticed the end tanks on the spoiler are starting to separate like everyone else that has my wing

if you looked at my bank account you would understand

Yeah, that's the problem with modding things..... we talked about it the last time you were here.

Originally Posted by helghast7

but like i said before, i dont mind that shit breaks, you no it gives me something to do

whats killing me is that its happening all at once

so i decided to repair the fc since i have all the parts already, get her back up and running, and rotate my fd back into hybernation, back up on jackstands she goes, pull the diff out take it to work and see whats inside

I think it's wise to have something reliable becuase just like you're going through, when shit breaks it's nice to just be able to say, fuck it, not now and get back into the DD and not worry about it. but when it's your DD and you need to get to work the next morning it just adds a level of stress that's completely not necessary and detracts from the whole hobby aspect of it. Not to mention you're a fricken ASE tech, you deal with broken shit all the time and then you get to go home and HAVE to deal with it if you want to get to work the next day. I was in a very similar situation when i was younger and I didn't do anything but maintenance to the FC for YEARS becuase of it. One of the reasons that I'm hesitant to get into it full time. Shoe makers shooes man.....

[2gslse]

Originally Posted by TitaniumTT

One of the reasons that I'm hesitant to get into it full time. Shoe makers shooes man.....

That is exactly why you should keep work life diffrent from you hobbies,my dad taught me how to work on my cars since I was old enough to be in the garage but always told me I don't want you doing this for a living. Great advice and I will follow it unless I get hard up for $ and a job.

[WE3RX7]

Why buy that hood when you basically built your own??? Is there a vert build thread I'm not aware of


BTW... I'd like to jump up to KDR at some point in late July or early August for some roller time, not sure what would work best for you, but weekends are all I've got!




Oh... and big win on the side job conversation... if anybody is able and willing, its a great way to earn extra $$$.. my car habit is almost 100% supported by side work and I just landed a crap ton of it after leaving my last employer... should get the FC project moving again....

[TitaniumTT]

Originally Posted by WE3RX7

Why buy that hood when you basically built your own??? Is there a vert build thread I'm not aware of

There is a 'vert, but no build thread as of yet. Actually starting to tear the car apart tomorrow if I can get this FC at least figured out today. Tidying up a bunch of wiring now to make the testing a TON easier, and also facilitate fuel pressure relief and prime etc etc etc.

I was going to build another hood, but looking at the amount of time that went into the first one, well, it doesn't make sense when you figure out what I paid, or will pay for this one. Better to spend my time working then working on the hood. In other words, I spent WAY more than 4 hours building, and that's about what I would have to work to pay off this hood......... if that makes sense.

Originally Posted by WE3RX7

BTW... I'd like to jump up to KDR at some point in late July or early August for some roller time, not sure what would work best for you, but weekends are all I've got!

If w/e's are all you've got, set something up soon. Spoke with Dave a few days ago and he;s booked solid through 7/26. So pick a w/e and I'll do my best to get it off. I'll actually hit you up with some dates when there are local auto-x's/track days if ya wanna stay up and represent

Originally Posted by WE3RX7

Oh... and big win on the side job conversation... if anybody is able and willing, its a great way to earn extra $$$.. my car habit is almost 100% supported by side work and I just landed a crap ton of it after leaving my last employer... should get the FC project moving again....

Yup, been there, done that.... don't have to worry about it now though Now I'm just greddy