Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

[TitaniumTT]

CJ Rail installed. Really looking forward to getting them to build me a rail even though I just bought the GURU rail. The GURU rail has it's shortcomings as well but it's the BEST option that's currently available. And when they say 3-4 day delivery from AU, they mean it.

Anyway - CJ rail



The big problem with the injectors and fitting them into the RE LIM is the 16mm+ opening for the injectors. I know alot of people just put a bigger o-ring on and call it done, but I was STRONGLY urged by Paul to NOT do that. So I looked around for the little adapter baskets and then a rail set to the right height and the Guru rail was it. Here's a pic of the little adapter bucket.



And installed in the LIM



The rail itself with the new ID2000's installed. If you look at the end, it's NOT a pipe thread as I would've liked to see. Instead it's a -8 ORB.



Now, how does one get a 1/2"NPT Marren FPD onto a -8ORB fitting. The answer is you don't without a myriad of adapter fittings. I hate adapter fittings. So after a 9 minute phone call to MoTeC and a 2 day wait, this little gem of a package arrives. Bosch FPD, -6 Banjo, and an M18x1.25 to -8 ORB fitting. Who the HELL has a fitting like that? MoTeC - the only company that continues to impress me. Now, do I put it on the front of the rail to show it off, of the end of the rail to make the plumbing easier?



And assembled