Mazdaspeed hoods - How many of you are interested?? - Page 4

ptrhahn · 04-07-2010, 09:17 PM

Wow, I'd never even seen the r spec before. That's the best looking vented hood i've ever seen. Please make one!

ptrhahn · 04-09-2010, 11:12 AM

Quote:

Originally Posted by afgmoto1978

In for the R-Spec unit for sure!

A little more aggressive opening on the center vent would be awesome. Or I will mod mine after I get it to accommodate my v-mount.

Will be rocking my modded aluminum hood until then.

Oops, maybe I was mistaken. I thought the hood in these pics was the R-Spec. Which hood is this one??

***Herblenny*** · 04-09-2010, 11:02 PM

Well, I got my 2nd MS hood painted.

But the fabricator is taking some time with first piece I gave him.. Until I get my first piece back, MS hood is on a hold until I could check out the first piece I'm replicating... which is MS CF front lip.

I'll keep you guys updated... one good thing is we now have a MS hood that could be used as a mold in house

ptrhahn · 04-10-2010, 06:53 AM

One thing I remember reading about the real MS hood was that it didn't absolutely require hood pins. If that were also the case w/ the replica (presumably a quality of construction issue), that would be fabulous.

***Herblenny*** · 04-10-2010, 07:51 AM

You are correct ptrhahn! Mazda had a TSB regarding latch point coming off the hood and popping open. I've talked to my fabricator about this before and he said that would not be an issue.. The real MS hoods are super light! I have to say the lightest hood I've lifted so far.. I don't think the repica will be this light.

REVIT93RX7 · 07-10-2010, 06:05 PM

I'm interested in the MS hood in CF. Need to ensure that the latch TSB was addressed and no hood pins. Keep us informed of where this is at please. Thanks

Doc-1 · 07-11-2010, 08:31 PM

How is the build coming? Look forward to hearing about the hood

Signal 2 · 07-12-2010, 10:43 AM

Fitment looks decent, but I don't see the windshield-washer nozzles mounted on the hood pictured above from April.

***TitaniumTT*** · 07-12-2010, 05:15 PM

I wouldn't want them.

Still interested in this Phil, would be able to send a deposit whenever for the MS hood in your pic above.

Love the color BTW

***Herblenny*** · 07-12-2010, 09:50 PM

Well, As of now, there is no plans for making this hood... as the fabricator is bit busy with other work. But I will let you know otherwise.... Sorry guys!

Ka Kui · 08-03-2010, 02:08 PM

Wow, I want this MS hood too~

Signal 2 · 08-03-2010, 05:33 PM

unsubscribed.

Wolfpack_99 · 11-04-2010, 01:31 PM

I've got a replica Mazdaspeed hood for sale in the classified (3rd gen) section in case anyone is interested. They are nice looking hoods, but I wanted to go as stock as possible.

Doc-1 · 11-11-2010, 08:26 PM

Well this is for shit!

neofreak · 12-08-2010, 02:23 PM

I'm willing to put a deposit on a R-Spec hood.

View Poll Results: Which type of MS hood.
Old Mazdaspeed hood	15	62.50%
New R-Spec Mazdaspeed hood (I'm willing to make a $200 deposit).	9	37.50%
Voters: 24. You may not vote on this poll

04-09-2010, 11:02 PM	#48
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Well, I got my 2nd MS hood painted. But the fabricator is taking some time with first piece I gave him.. Until I get my first piece back, MS hood is on a hold until I could check out the first piece I'm replicating... which is MS CF front lip. I'll keep you guys updated... one good thing is we now have a MS hood that could be used as a mold in house __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

04-10-2010, 07:51 AM	#50
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	You are correct ptrhahn! Mazda had a TSB regarding latch point coming off the hood and popping open. I've talked to my fabricator about this before and he said that would not be an issue.. The real MS hoods are super light! I have to say the lightest hood I've lifted so far.. I don't think the repica will be this light. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

07-10-2010, 06:05 PM	#51
REVIT93RX7 REVIT Join Date: Sep 2008 Location: Palm Bay, FL Posts: 90 Rep Power: 17	CF Hood I'm interested in the MS hood in CF. Need to ensure that the latch TSB was addressed and no hood pins. Keep us informed of where this is at please. Thanks

07-12-2010, 10:43 AM	#53
Signal 2 Viable Fossil Join Date: Mar 2008 Location: Mid-West Posts: 199 Rep Power: 18	Fitment looks decent, but I don't see the windshield-washer nozzles mounted on the hood pictured above from April. __________________ Jim VR R1 FD Last edited by Signal 2; 07-12-2010 at 10:46 AM.

04-07-2010, 09:17 PM	#46
ptrhahn The Newbie Join Date: Feb 2009 Posts: 12 Rep Power: 0	Wow, I'd never even seen the r spec before. That's the best looking vented hood i've ever seen. Please make one!

04-10-2010, 06:53 AM	#49
ptrhahn The Newbie Join Date: Feb 2009 Posts: 12 Rep Power: 0	One thing I remember reading about the real MS hood was that it didn't absolutely require hood pins. If that were also the case w/ the replica (presumably a quality of construction issue), that would be fabulous.

07-11-2010, 08:31 PM	#52
Doc-1 Rotary Fanatic Join Date: Feb 2008 Location: Madison Alabama Posts: 115 Rep Power: 18	How is the build coming? Look forward to hearing about the hood

07-12-2010, 05:15 PM	#54
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I wouldn't want them. Still interested in this Phil, would be able to send a deposit whenever for the MS hood in your pic above. Love the color BTW __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-12-2010, 09:50 PM	#55
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Well, As of now, there is no plans for making this hood... as the fabricator is bit busy with other work. But I will let you know otherwise.... Sorry guys! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

08-03-2010, 02:08 PM	#56
Ka Kui FD3S Join Date: Aug 2010 Location: Toronto, Canada Posts: 3 Rep Power: 0	Wow, I want this MS hood too~ __________________ 1993 Brilliant Black RX-7 Touring \| HKS Downpipe \| Racing Beat Exhaust \| Samco Radiator Hoses \| RE-A Air Separator Tank \| RE-A Radiator Cap & Engine Oil Cap \| RE-A Hard Pipes \| RE-A Turbo Boost Gauge \| Koyo Radiator N-Flo \| RE-A SMIC \| FEED Side Skirt \| 2007 Pearl White RX-8 GT \| Mazdaspeed Cold Air Intake \| Mazdaspeed Front Strut Bar \| Mazdaspeed MS-T II Aluminum rims \| OEM Rear Mud Guards

08-03-2010, 05:33 PM	#57
Signal 2 Viable Fossil Join Date: Mar 2008 Location: Mid-West Posts: 199 Rep Power: 18	unsubscribed. __________________ Jim VR R1 FD

11-04-2010, 01:31 PM	#58
Wolfpack_99 The Newbie Join Date: Nov 2010 Posts: 3 Rep Power: 0	I've got a replica Mazdaspeed hood for sale in the classified (3rd gen) section in case anyone is interested. They are nice looking hoods, but I wanted to go as stock as possible.

11-11-2010, 08:26 PM	#59
Doc-1 Rotary Fanatic Join Date: Feb 2008 Location: Madison Alabama Posts: 115 Rep Power: 18	Well this is for shit!

12-08-2010, 02:23 PM	#60
neofreak The Newbie Join Date: Dec 2008 Posts: 28 Rep Power: 0	I'm willing to put a deposit on a R-Spec hood.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode