|
DGRR Archive Threads from Previous Deals Gap Rotary Rally Events. |
|
Thread Tools | Display Modes |
03-05-2010, 08:07 PM | #1 |
Rotary Fan in Training
|
Advice on route from Maine border + any Caravan's to join?
Hello. This is my first post here (been on RX8 and RX7 clubs for years) so forgive me if I just jump right in.
I'm located in Halifax, Nova Scotia, and I just registered for the DGRR (and I'm working on a couple of local friends to come as well.) I've got about a 5 or 6 hour drive to get from Halifax to the Maine border. From that point on, I'm lost and at the mercy of Google Maps and my TomTom. I'm asking for anybody with local knowledge for any advice they can shed on best routes from there to get to the event. (Or any groups we could fall in with on the way.) Playing with Google Maps, Streets & Trips etc. looks like we could make it somewhere into Connecticut or New York State on the first day with out killing my self (but it would be a long day.) Any input on the best routes? Caravan's? Thanks for reading, and thanks in advance for any advice. Edit: Should mention I am still up in the air on targeting a Thursday or Friday arrival. Last edited by Redshft; 03-05-2010 at 08:10 PM.. Reason: Additional Detail |
03-05-2010, 09:23 PM | #2 |
Test Whore - Admin
|
Well, I know the ME coast fairly well and having been there and back 4 times in as many months, I can tell you that from Rockland ME you're definately going to want to hop on RT1, to 295, to 95 right at the NH border. Follow that for about an hour then pick up 495 to avoid Boston. 495 intersects 90, the Mass Pike, be careful on the Mass Pike, well patrolled, OVER patrolled.... 90 runs into 84, take that to the Charter Oak Bridge and it'll dump you on 91S. Follow that for maybe 20minutes until you start to see signs for RT 15, Merrit Parkway, around exit 17 I believe. Take the Merrit Pkwy as far as you want.
We're leaving from Stamford, CT Thursday morning and making the trip down in one shot. We'll be taking 95, 287, 78, 81, etc etc. The Merrit runs right into 287.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- Last edited by TitaniumTT; 03-05-2010 at 09:26 PM.. |
03-05-2010, 10:06 PM | #3 |
Rotary Fan in Training
|
Wow, great post. Thank you.
Actually, Stamford was one of our leading candidates for a stopover point. We may just want to meet up with you if you don't mind some Canadians (hopefully more than me) tagging along.
__________________
2004 RX8 GT 1986 RX7 Track Car: 13B Bridge Port w/ Renesis Internals and Weber Carb 2003 MazdaSpeed Protege 1988 RX7 Convertible - new project 2004 Impreza and 2003 Legacy wagons for hauling groceries and The Dog |
03-05-2010, 11:40 PM | #4 |
Test Whore - Admin
|
Not at all, smaller caravans are awesome. If you plan on stopping over in Stamford I can point you in the direction of some nice hotels.... some SECURE hotels.
Which rotary are you bringing and can ya make the 14 hr trip on Thurs?
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
03-06-2010, 07:42 AM | #5 |
Rotary Fan in Training
|
You read my mind on my next question. Secure parking (at a reasonable cost) was my next concern.
14Hr's in a day doesn't phase me too much (I travel a lot for work, and driving 4 hours, having 4 or 5 hours of meetings, then driving another 4 hours home is common.) I'll talk it over this weekend (with my better half, and with the potential other car or two who are coming) and see what they think. I would be bringing the RX8. The RX7 is WAY past being street legal (full cage, no headlights, no dash, no side glass etc.) Heading in a couple of hours to help a friend of mine put his car back together. If we can get it all done, he and his wife plan to come too. (93 R1 w/ street port and an ASpec GT35.) Well, the engine is sitting on a stand right now, but should be in the car by tonight. Then just need to plumb it all, install the V-mount, front bumper, and fuel pump and tune the PowerFC... wow... I better get off the internet and get to work...
__________________
2004 RX8 GT 1986 RX7 Track Car: 13B Bridge Port w/ Renesis Internals and Weber Carb 2003 MazdaSpeed Protege 1988 RX7 Convertible - new project 2004 Impreza and 2003 Legacy wagons for hauling groceries and The Dog |
03-06-2010, 09:40 AM | #6 | ||||
Test Whore - Admin
|
Quote:
Quote:
Quote:
Quote:
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
||||
03-06-2010, 06:33 PM | #7 |
Rotary Fan in Training
|
All sounds great. Hoping to get go/no go's from a couple of folks in the next few days, and then we'll know where we're leaving, what route we can take and who we can meet up with.
Made good progress today. Engine and transmission are in the car. Starter, clutch slave, power steering, new fuel pump, water pump and all of that stuff back on. UPS had the turbo kit "out for delivery" all day yesterday without actually trying to deliver, so we're hoping he'll see that on Monday. Then just need to get the VMount in, plumb the fuel system, do all the fluids and tune it.. plus the half dozen things I'm sure I'm not thinking of yet. But, seems like much less then you have to worry about. Depends how much time he plans to spend with his kids over the next few weeks I guess...
__________________
2004 RX8 GT 1986 RX7 Track Car: 13B Bridge Port w/ Renesis Internals and Weber Carb 2003 MazdaSpeed Protege 1988 RX7 Convertible - new project 2004 Impreza and 2003 Legacy wagons for hauling groceries and The Dog |
03-30-2010, 09:40 PM | #8 |
Test Whore - Admin
|
Any updates on the caravan down?
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
03-31-2010, 07:25 AM | #9 |
Rotary Fan in Training
|
You are reading my mind. I was trying to plan out the trip last night. Just waiting to hear back from one more person on my end and was going to drop you a message this weekend.
Currently our plan is to try to meet up with you guys in Stamford or vicinity on Thursday morning and do the haul down. FD is coming along well and we think we'll be able to start it this weekend to give him a week of shakedown to determine if he's up for tackling the trip or not. (All that's left is some electrical, put the intake manifold on, run vacuum and fill up the fluids, put the bumper, hood, undertray etc. on but the car has been sitting for almost 2 years, so who knows what will happen once it rolls.) Better half and me in the RX8 are for sure. Friend and his wife in FD are for sure if this weekend goes well... still waiting to hear 100% on a friend and his FC. (3 others were strongly looking into it but couldn't get the time off.)
__________________
2004 RX8 GT 1986 RX7 Track Car: 13B Bridge Port w/ Renesis Internals and Weber Carb 2003 MazdaSpeed Protege 1988 RX7 Convertible - new project 2004 Impreza and 2003 Legacy wagons for hauling groceries and The Dog |
03-31-2010, 08:11 AM | #10 |
Test Whore - Admin
|
Very very cool.
Right now our plan is to thrash like hell for the next 2 weeks to get these two cars done.... neither has an engine/trans/ and mine doesn't even roll yet Leave early thurs moring, around 6ish to get through the Tap before rush hour and drive straight through. Hooking up with a buddy on his sportbike somewhere along the way and I gotta get in touch with my Jersery/New York friends and see what's going on with them. but if you're coming with 4 cars it sounds like? we'll be 7 for sure, maybe 12... COOL! -Brian
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
03-31-2010, 08:26 AM | #11 |
Rotary Fan in Training
|
Excellent. Sounds like a plan is forming. We're aiming for the 6am start around Stamford, but will depend on accommodations. Playing on Expedia, it seems like about an hour from Stamford is about half the price. (But means getting up WAY earlier.)
Good luck on getting yours done. I've been there with my race FC. I had it in a car show (display for our race series) a few years ago about 2 weeks after it being pretty much a shell sitting on jackstands. Had to roll it in with an old set of 4 bolt hubs back on it (my 5 bolt conversion was lost in shipping) and vice grips clamping off the brake lines that didn't fit the old 4 bolt calipers.. actually used my drip trays that weekend. I've got faith you can do it. We can sort out some details in the next few days as I get people to focus on the trip. (I'll probably PM you my email address to make it easier.) Right now, baring a disaster (it is an FD afterall) we are 2 cars for sure, with I'd put it at 50% odds on adding a 3rd car (FC Turbo) 2 more want to come but one, his "+ guest" is a Bride's Maid that weekend and he can't skip it/go without her, and the other is literally in his final week of Dental School that week. After 7 years, he's not sure he can blow off the last week of Clinic, but he's trying.
__________________
2004 RX8 GT 1986 RX7 Track Car: 13B Bridge Port w/ Renesis Internals and Weber Carb 2003 MazdaSpeed Protege 1988 RX7 Convertible - new project 2004 Impreza and 2003 Legacy wagons for hauling groceries and The Dog Last edited by Redshft; 03-31-2010 at 08:30 AM.. |
04-08-2010, 07:00 AM | #12 |
Rotary Fan in Training
|
Well, things are still on track for me, and I'm planning on meeting up with TitaniumTT on CT on the way down Thursday morning. Anybody else along the Nova Scotia to CT route planning to go?
The FD fired up on the first crank on Monday night, but we've been struggling with the PowerFC since then. (First time I'd ever seen one) So if we can get the FC to co-operate in time for him to put a few miles on the car, he's in too. (Looks like the other FC won't be able to make it.) Anybody out there good at remotely troubleshooting a PowerFC?
__________________
2004 RX8 GT 1986 RX7 Track Car: 13B Bridge Port w/ Renesis Internals and Weber Carb 2003 MazdaSpeed Protege 1988 RX7 Convertible - new project 2004 Impreza and 2003 Legacy wagons for hauling groceries and The Dog |
04-09-2010, 09:09 AM | #13 | ||||
Test Whore - Admin
|
Quote:
It depends on where you stay. If you get off 91 and hop on 84 and stay around Danbury, you wouldn't have to get up any earlier. We just wouldn't meet in Stamford, we would meet somewhere in Jersey or even better, I want to take a quick stop in PA at a friends shop. Quick cop of coffee, BS a little and get back on the rd. Anywhere along 84 is going to be cheaper than anywhere along 95 on the same basic longitude line. Quote:
Quote:
Quote:
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
||||
Bookmarks |
Tags |
deals gap rotary rally, dgrr |
Thread Tools | |
Display Modes | |
|
|