FC3S Murray's never ending build.

[FC3S Murray]

Well I just got back from a little drive:

at 165* F oil temp I get 79/80 psi at 3k rpm, 90 psi at 5500 rpm and 18 psi at 950 idle rpm

At 175/180*F oil temp I get 75 psi at 3K, 85-87 psi at 5500 rpm and 12-14 psi at 950 idle rpm

I bumped my idle to 1050 rpm and now she sits at 20 psi @ 180*F and 25 psi @ 160* F.

It still bothers me BUT at least my 3K test via the FSM is within spec and anything higher rpm is GREAT!

I do also wonder if this 10W-30 is a little broken down/fuel saturated from 560 miles of very rich AFR's and a shit load of sitting idle time on it(winter start ups). It still is somewhat viscous but i know our oil gets "fuely" over time.

As for my coilovers: they are doing great! I love the ride!!! I do have a slight clunk in the rear when the car gets tossed side to side from road bumps AND on sudden clutch release. My subframe looks mighty close to my diff and I wonder if these MMR adjusters clunk a little since the aluminum block doesnt fit in real snug in the trailer arm.