FC3S Murray's never ending build. - Page 28

FC3S Murray · 03-30-2010, 06:20 PM

Now on to my pics of the car!!

Took her out today to make sure everything was good after the winter suspension overhaul. I ended up leaving about 3/4 inch gap between the fender and tire( all you flush lovers back off

) My reasoning is my damnper settings are semi-soft, 12 clicks past soft and these roads here SUCK ASS. Second reason I went with that ride height was with 235's up front are BEEFY and with my camber plates maxed, I wouldn't get much of a tuck....actually none at all. My tire would chew the shit out of my pretty fender and I dont want that

.

Anyway I had no issues except for the annoying smell of my new turbo blanket burning up

.....headache from the fumes. No clunks, no bushing noise, nothing which is rare from my constantly-breaking POS FC.

Here are the pics, enjoy....

FC3S Murray · 03-30-2010, 06:21 PM

FC3S Murray · 03-30-2010, 06:23 PM

I think it is pretty "flush"

FC3S Murray · 03-30-2010, 06:25 PM

Nothing new in the interior yet....just cleaned it up from sitting for 6 months

Engine bay with new black turbo blanket and SOON water injection

Overall I am happy with the results of both my wheels and suspension. That was a shit load of work but worth it. 900 miles to go on break in and the real fun begins!

need RX7 · 03-30-2010, 06:43 PM

I love it. Looks awesome.

***TitaniumTT*** · 03-30-2010, 08:08 PM

Damn Sean, probably the best looking, cleanest FC I've ever seen. You should be very proud..... DAYUM.

Those are 17x8,9 +28 F&R right? Making me want a set of 5mm spacers.

RETed · 03-30-2010, 09:03 PM

Quote:

Originally Posted by FC3S Murray

Camber plates very nice BUT they peg out at -1.5 degrees because of the allen bolts hitting the bulkhead.

Did you move the allen bolts around?
I noticed that in your pic there's extra holes in the "center" of the plate - this is typical of most camber plates.
You can remove the bolts from the "top" and reinsert them in the lower positions, allowing you the get more adjustment.
Unless the sliding camber block is hitting something?

-Ted

***TitaniumTT*** · 03-30-2010, 09:28 PM

Ted's right, exact same thing with my c/o's as well. There shouldn't be anything inside the tower that will limit you to 1.5. IIRC I'm running about -3 with a little more to go

FC3S Murray · 03-30-2010, 09:32 PM

Quote:

Originally Posted by need RX7

I love it. Looks awesome.

Thank you! I do too.

Quote:

Damn Sean, probably the best looking, cleanest FC I've ever seen. You should be very proud..... DAYUM.

Those are 17x8,9 +28 F&R right? Making me want a set of 5mm spacers.

Thanks Brian, coming from Mr. OCD himself that means a lot

Go for the spacers.

Quote:

Did you move the allen bolts around?
I noticed that in your pic there's extra holes in the "center" of the plate - this is typical of most camber plates.
You can remove the bolts from the "top" and reinsert them in the lower positions, allowing you the get more adjustment.
Unless the sliding camber block is hitting something?

Thanks Ted!!! I didn't even notice that.

project86 · 03-31-2010, 01:04 AM

ya... i guess it looks alright....

hhhaahahaha who am i kidding that looks way good . i like the equips alot better than the ssrs. good pickin. now i just nee to get mine on the road

***TitaniumTT*** · 03-31-2010, 08:03 AM

Yeah you do, an we need more hi-res pics of your car, something that shows the pearl more damnit

project86 · 03-31-2010, 06:23 PM

i know!!! i dont know why the camera doesnt really pick up the pearl that well... hm......

djmtsu · 03-31-2010, 06:43 PM

Looking VERY good man!

Now, quit being a pussy and drive that thing to DGRRX!!!!!

Seriously, what are you chicken?

FC3S Murray · 03-31-2010, 08:20 PM

Quote:

Originally Posted by djmtsu

Looking VERY good man!

Now, quit being a pussy and drive that thing to DGRRX!!!!!

Seriously, what are you chicken?

yeah that is a pipe dream.

***TitaniumTT*** · 03-31-2010, 08:49 PM

pssssh, if you drove to DGRRX at least you'd have your engine broken in sometime during 2010

03-30-2010, 06:20 PM	#406
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Now on to my pics of the car!! Took her out today to make sure everything was good after the winter suspension overhaul. I ended up leaving about 3/4 inch gap between the fender and tire( all you flush lovers back off) My reasoning is my damnper settings are semi-soft, 12 clicks past soft and these roads here SUCK ASS. Second reason I went with that ride height was with 235's up front are BEEFY and with my camber plates maxed, I wouldn't get much of a tuck....actually none at all. My tire would chew the shit out of my pretty fender and I dont want that. Anyway I had no issues except for the annoying smell of my new turbo blanket burning up.....headache from the fumes. No clunks, no bushing noise, nothing which is rare from my constantly-breaking POS FC. Here are the pics, enjoy.... __________________ Same pig, new soul

03-30-2010, 06:21 PM	#407
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	__________________ Same pig, new soul

03-30-2010, 06:23 PM	#408
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	I think it is pretty "flush" __________________ Same pig, new soul Last edited by FC3S Murray; 03-30-2010 at 09:30 PM.

03-30-2010, 06:25 PM	#409
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Nothing new in the interior yet....just cleaned it up from sitting for 6 months Engine bay with new black turbo blanket and SOON water injection Overall I am happy with the results of both my wheels and suspension. That was a shit load of work but worth it. 900 miles to go on break in and the real fun begins! __________________ Same pig, new soul Last edited by FC3S Murray; 03-30-2010 at 06:33 PM.

03-30-2010, 06:43 PM	#410
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	I love it. Looks awesome. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

03-30-2010, 08:08 PM	#411
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Damn Sean, probably the best looking, cleanest FC I've ever seen. You should be very proud..... DAYUM. Those are 17x8,9 +28 F&R right? Making me want a set of 5mm spacers. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-30-2010, 09:28 PM	#413
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Ted's right, exact same thing with my c/o's as well. There shouldn't be anything inside the tower that will limit you to 1.5. IIRC I'm running about -3 with a little more to go __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-31-2010, 01:04 AM	#415
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	ya... i guess it looks alright.... hhhaahahaha who am i kidding that looks way good . i like the equips alot better than the ssrs. good pickin. now i just nee to get mine on the road __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

03-31-2010, 08:03 AM	#416
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yeah you do, an we need more hi-res pics of your car, something that shows the pearl more damnit __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-31-2010, 06:23 PM	#417
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	i know!!! i dont know why the camera doesnt really pick up the pearl that well... hm...... __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

03-31-2010, 06:43 PM	#418
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Looking VERY good man! Now, quit being a pussy and drive that thing to DGRRX!!!!! Seriously, what are you chicken? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-31-2010, 08:49 PM	#420
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	pssssh, if you drove to DGRRX at least you'd have your engine broken in sometime during 2010 __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode