FD Air pump Deletion Idler (Interest feeler)

Garfinkles Motor Works · 11-19-2008, 08:44 PM

I have not had the pullies made but I am tring to keep the price at $200 or less .I have the double row bearings ,$50 plus dollars and the shafts and brackets .I need to find a shop to make the pullies .

R-R-Rx7 · 11-20-2008, 08:22 AM

Do you require any deposit in order to secure one(once they are ready?)

Garfinkles Motor Works · 11-21-2008, 08:57 AM

When they are ready I will post it and the sale will be first come first served .

Garfinkles Motor Works · 02-07-2009, 05:19 AM

I have some ready to ship $ 200 plus shipping . Alum pulley .double row bearing ,30 MM steel shaft ,steel brackets , fully adjustable .

Signal 2 · 03-03-2009, 08:45 AM

http://rotarycarclub.com/rotary_foru...ead.php?t=6920

Garfinkles Motor Works · 06-09-2009, 08:32 AM

I have several ready to ship .

Garfinkles Motor Works · 12-27-2009, 07:29 PM

I have installed an idler on a car with a single turbo It may fit others as well .

howard coleman · 02-17-2010, 09:06 PM

i really need this but haven't quite finished my new turbo manifold and will have to wait a couple of weeks to see if i will have the space.

howard

p.s. i have a need for a couple of engine torque braces in the next couple of weeks and will be installing your oilpan brace on all my motors...

www.colemanprecisionrotaries.com

Garfinkles Motor Works · 03-22-2010, 08:26 PM

When you are ready I can send you one to try the fitment . You can shorten the adjusting arm I am sure. I do not supply the adjusting arm you must cut and drill your stock one .

03-03-2009, 08:45 AM	#20
Signal 2 Viable Fossil Join Date: Mar 2008 Location: Mid-West iTrader: (0) Posts: 199 Rep Power: 17	http://rotarycarclub.com/rotary_foru...ead.php?t=6920 __________________ Jim VR R1 FD

03-22-2010, 08:26 PM	#24
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 iTrader: (11) Posts: 535 Rep Power: 17	When you are ready I can send you one to try the fitment . You can shorten the adjusting arm I am sure. I do not supply the adjusting arm you must cut and drill your stock one . Last edited by Garfinkles Motor Works; 08-17-2011 at 08:36 PM.. Reason: add more

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-19-2008, 08:44 PM	#16
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 iTrader: (11) Posts: 535 Rep Power: 17	I have not had the pullies made but I am tring to keep the price at $200 or less .I have the double row bearings ,$50 plus dollars and the shafts and brackets .I need to find a shop to make the pullies .

11-20-2008, 08:22 AM	#17
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 90 Rep Power: 17	Do you require any deposit in order to secure one(once they are ready?)

11-21-2008, 08:57 AM	#18
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 iTrader: (11) Posts: 535 Rep Power: 17	When they are ready I will post it and the sale will be first come first served .

02-07-2009, 05:19 AM	#19
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 iTrader: (11) Posts: 535 Rep Power: 17	I have some ready to ship $ 200 plus shipping . Alum pulley .double row bearing ,30 MM steel shaft ,steel brackets , fully adjustable .

06-09-2009, 08:32 AM	#21
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 iTrader: (11) Posts: 535 Rep Power: 17	I have several ready to ship .

02-17-2010, 09:06 PM	#23
howard coleman The Newbie Join Date: Dec 2008 iTrader: (0) Posts: 17 Rep Power: 0	i really need this but haven't quite finished my new turbo manifold and will have to wait a couple of weeks to see if i will have the space. howard p.s. i have a need for a couple of engine torque braces in the next couple of weeks and will be installing your oilpan brace on all my motors... www.colemanprecisionrotaries.com