FS: bov, wg, injectors, etc

rotor85 · 02-21-2010, 09:23 PM

some stuff i have laying around and decided to get rid of.
any questions reach me at 915-373-5414. for shipping purposes i am in el paso, texas zip code 79932

RC Engineering 850cc injectors in perfect working condition. these things flow but unfortunately i need bosch style tops for my new kg rails. $150

Blitz BOV. too loud for my taste, works perfect. $75

2 wastegates, both 40mm, one is an hks with an 11-si spring in it and a fairly new diaphragm an a 18psi spring included. the other one is an HKS knockoff with a 9psi spring. both worked great on my car. asking $200 for both.

Faze A/F ratio gage new in the box. $20

if you want me to ship items i will get you the total cost of the shipping before you make payments. thanks.

FerociousP · 02-21-2010, 09:57 PM

Are the injectors high or low impedance?

rotor85 · 02-21-2010, 10:40 PM

i believe they are high impedance. i never had any issues with heat or anything and just used them plug and play style. only reason for sale is i need new ones with 14mm top for the kg rails i got.

the numbers on the injectors are:
sn9x-850 (from rc engineering)
195500-1370 on the top part opposite of where they say denso.

FerociousP · 02-21-2010, 10:58 PM

were you running stock ecu ? S5?

I would be running a s5 ecu w/ an RTEK, which would mean I'd have to dial these back... looking at my options but that is why they would have to be high impedance.

rotor85 · 02-21-2010, 11:19 PM

Using a microtech lt-10.

Gregory Casimir · 02-22-2010, 09:41 AM

how much would the BOV be shipped to 33176

rotor85 · 02-22-2010, 10:41 AM

Quote:

Originally Posted by Gregory Casimir

how much would the BOV be shipped to 33176

USPS flat rate medium box 11.00
usps large box 14.50

rotor85 · 02-27-2010, 06:06 PM

Bov and A/f Gage sold

bump for injectors and wastegates.
Make some offers...worst I can say is no...lol..

02-21-2010, 09:23 PM	#1
rotor85 The Newbie Join Date: Dec 2009 Location: Hell Paso, Texas Posts: 28 Rep Power: 0	FS: bov, wg, injectors, etc some stuff i have laying around and decided to get rid of. any questions reach me at 915-373-5414. for shipping purposes i am in el paso, texas zip code 79932 RC Engineering 850cc injectors in perfect working condition. these things flow but unfortunately i need bosch style tops for my new kg rails. $150 Blitz BOV. too loud for my taste, works perfect. $75 2 wastegates, both 40mm, one is an hks with an 11-si spring in it and a fairly new diaphragm an a 18psi spring included. the other one is an HKS knockoff with a 9psi spring. both worked great on my car. asking $200 for both. Faze A/F ratio gage new in the box. $20 if you want me to ship items i will get you the total cost of the shipping before you make payments. thanks.

02-21-2010, 09:57 PM	#2
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	Are the injectors high or low impedance? __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

02-21-2010, 10:58 PM	#4
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	were you running stock ecu ? S5? I would be running a s5 ecu w/ an RTEK, which would mean I'd have to dial these back... looking at my options but that is why they would have to be high impedance. __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-21-2010, 10:40 PM	#3
rotor85 The Newbie Join Date: Dec 2009 Location: Hell Paso, Texas Posts: 28 Rep Power: 0	i believe they are high impedance. i never had any issues with heat or anything and just used them plug and play style. only reason for sale is i need new ones with 14mm top for the kg rails i got. the numbers on the injectors are: sn9x-850 (from rc engineering) 195500-1370 on the top part opposite of where they say denso.

02-21-2010, 11:19 PM	#5
rotor85 The Newbie Join Date: Dec 2009 Location: Hell Paso, Texas Posts: 28 Rep Power: 0	Using a microtech lt-10.

02-22-2010, 09:41 AM	#6
Gregory Casimir Rotary Fanatic Join Date: Jan 2010 Posts: 253 Rep Power: 16	how much would the BOV be shipped to 33176

02-27-2010, 06:06 PM	#8
rotor85 The Newbie Join Date: Dec 2009 Location: Hell Paso, Texas Posts: 28 Rep Power: 0	Bov and A/f Gage sold bump for injectors and wastegates. Make some offers...worst I can say is no...lol..