Welcome to our brand spankin new subform!

[Wheelman74]

and my next question,since im in the habit of asking, is if this kit does in fact fit an existing H6054 setup, does it accomodate H4 bi-xenon bulbs? and then if the answer to that is yes, CAN I BUY JUST YOUR PROJECTOR ASSEMBLY AND NOT THE WHOLE LIGHTING/WIRING KIT????

[Mobius]

Originally Posted by Wheelman74

and my next question,since im in the habit of asking, is if this kit does in fact fit an existing H6054 setup, does it accomodate H4 bi-xenon bulbs? and then if the answer to that is yes, CAN I BUY JUST YOUR PROJECTOR ASSEMBLY AND NOT THE WHOLE LIGHTING/WIRING KIT????

I can't answer if it will fit any H6054 setup, as my set is still in production.

However, I do know that the retrofits use replica projectors from an Infinity FX35/FX45/Nissan 350Z.

So it does not accept a HID bulb that has been rebased to an H4 socket. IIRC they use D2S (OEM HID projector) bulbs.

However, if you want to make your own retrofit (I was too lazy, and this kit was more convenient), you can find the projectors/ballasts/bulbs/ect at www.theretrofitsource.com

Additionally, you can read up on doing your own retrofit in the University section of www.hidplanet.com

[Wheelman74]

helpful information. as far as fitting the H4 existing setup i have now i figured that would be much too convenient, but if i can somehow confirm the projector assembly SakeBomb manufactures will fit an existing H6054 housing, id rather just get it from someone who has more experience retrofitting it than i do... thanks for the insight!

[3RotorMotor]

Originally Posted by Wheelman74

helpful information. as far as fitting the H4 existing setup i have now i figured that would be much too convenient, but if i can somehow confirm the projector assembly SakeBomb manufactures will fit an existing H6054 housing, id rather just get it from someone who has more experience retrofitting it than i do... thanks for the insight!

No the FD kit will not fit that rectangular light... though the FC rx7 shares that light and we just finished a prototype set for that lamp. I don't want to go too far off topic in this thread (I'll start another FC/FB interest thread shortly) but since you asked I wanted to post our current working prototype. Whether we make this (and the 7" round version) will hinge on the amount of demand for them... but here are some shots of the FC / H6054 projectors:









Feel free to open an interest thread in our section if you like... I'll probably get a thread going soon but ive been swamped recently The output would be identical to the FD sets we are currently making. Unfortunately there is even more work involved in creating these projectors (as compared to the FD version) so the price will be at least that of the FD one (hopefully not more). There is an unreasonable amount of steps involved in retrofitting these (and the FD) lights, and unfortunately it all must be done by hand. It's more of an art than a science...