Re-upholster your FD's console or anything else... ask me how! Thread

Sideo · \r\n \r\n \r\n 02-14-2011, 01:55 AM\r\n \r\n \r\n

Feel free to move this to the appropriate section...

Well i was lookin' at the ol' rex today and i was contemplating doing some work, now i had just bought a bunch of new interior plastic such as a new shifter console and some other stuff but then looking around at the new stuff made the old stuff look just that much older. the original console had seen better day and was faded, and showing its scratches while the shift boots and e-brake boots were also looking pretty tattered too with holes through the original vinyl (yep i thought it was real leather before but nope) scratches and even burn marks left by the previous owner. and the shifter knob looked like crap too. it had holes in the leather, which was worn worse than my work boots. this is obviously no good if i have a brand new oem shifter console going in.

Now ive looked around before and found redlinegoods which offers a "console cover" and matching shift and e-brake boots to go with but at $140.00 or so it also seemed a bit steep so i waited. and i waited. i really liked the look of their cover and the boots but just couldnt justify the price so tonight it came to it that i had to do something about my dire interior.

The solution? a trip down to the fabric store yeilded some fabric backed imitation leather (read: vinyl) that looks nearly identical to the oem grain pattern... WOWEEE and some bright red top stiching thread. at a mere $9.00 PER YARD i thought i can afford to learn something new and not really be any worse off than i am now if i screw it all up... so i got the girlfriend to show me the basics of the sewing machine which had been hiding in the closet for months... and i was off!

Now i must contend that I have never sewn anything ever. in my entire life. but i was determined to make this work so with a test piece of my fabric and some black thread i got to practicing for about 5 minutes until when i actually got the hang of it... then with some brief laughs from the girlfriend i learned how to "butterfly" a seam so i could get the same look that redline has on their site... red stitching on black leather yaaa baddasss!

The shift and e-brake boots were easy as you take them out of your car unstitch the seams and use the pieces as templates for the new fabric! pin and cut. simple. then sew the panels together from the backside add your topstitching and VOILA it really was just that easy... and if i can do it the first time i think anyone can really.

the console was even easier. now at this point i dont want to take anything away from redline goods where i got my inspiration because im sure that they offer a very high quality product but if your cheap like me and dont mind trying something this is quite easy... far easier than i ever imagined.

Cut out the shape of the console from the old piece of vinyl pull it over the plastic and draw a straight line where you want to stitch with sewing chalk. which wipes off clean with a damp rag. so i sewed my lines and fitted it again... amazing.

now i had crap loads of leftover vinyl Oh i bought 1.5 yards and have roughly half of that leftover. so i thought ill give the shift knob a go.. now heres where it got tricky. you cant use a machine so your gonna have to learn some patience and do it by hand. so after a quick google search for "baseball stitch" and 2 minutes of reading i was set... got my pattern and started pulling thread trying my damndest to keep my spacing right. once i got all the stitching on and on the knob youll see that it fits loose so you have to go back a few times over "tightening" each stitch starting at the beginning each time but it gets looking good quick. this was the most time consuming part of the whole night and the knob from start to end took about 2 hours... not bad for someone whos never picked up a needle and thread before!

Total time spent doing all of the work below was about 5-6 hours with next to no involvement from the significant other!
Total money spent:

$2.50 for bright red topstitching,
$11.50 For 1.5 Yards of faux leather with fabric backing
$4.80 for spray glue from homedepot to put the console cover on.

=$18.80 for a brand new interior!

now some pics

\r\n \r\n \r\n 11-10-2008, 01:36 AM\r\n \r\n \r\n	\r\n \r\n #2\r\n \r\n
\r\n\r\n \r\n \r\n Cp1\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n __________________ \r\n Thank God For Pistons! How else would we brake! \r\n \r\n \r\nNASA Great Lakes Region \r\nTTD #53 Rx7\r\n \r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n
\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n	\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n