Lighter = Faster (N/A build thread #2)

infernosg · 05-31-2017, 12:29 PM

Black paint works alright.

The last picture was taken at ~8 PM, which is why it has a yellow/brown tint. Everything turned out pretty good. I think I did three coats on everything. I laid down heavy coats and used a nylon scrubbing brush to even everything out. The backing didn't really take the color so you can still see gray through the fibers if you look hard enough. It's a little stiffer overall but wouldn't be noticeable to someone not familiar with the original texture.

05-31-2017, 12:29 PM	#10
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Black paint works alright. The last picture was taken at ~8 PM, which is why it has a yellow/brown tint. Everything turned out pretty good. I think I did three coats on everything. I laid down heavy coats and used a nylon scrubbing brush to even everything out. The backing didn't really take the color so you can still see gray through the fibers if you look hard enough. It's a little stiffer overall but wouldn't be noticeable to someone not familiar with the original texture. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS Last edited by infernosg; 06-08-2017 at 08:47 AM.