AccessPORT for the RX-8

mazdamaniac · 07-15-2008, 05:11 PM

The Cobb AccessPORT for the RX-8 is now available.

This device supersedes any and all engine management devices for the RX-8.
It essentially turns your OE PCM into a tightly integrated stand-alone engine management system.
All fuel and ignition tables can be customized for any application - including all forms of forced induction - and most of the auxiliary functions can be adjusted to suit.
Oil metering, MAF/IAT/EcTS mapping, idle speed, rev limit, cooling fan on/off, accelerator pedal mapping, closed-loop operation, injector scaling and latency, ignition dwell, knock sensor limits, warm-up limits and S-DAIS operation are all independently adjustable and all CEL functions can be disabled as needed through the Calibration Service offered by MazdaManiac and included with every MazdaManiac AccessPORT purchase.

The Cobb AccessPORT is now available for all North American models, both manual and automatic 2004 - 2007.

The Cobb AccessPORT is now available for all Asian and European Models as well!

Custom Calibrations are now available for those that have purchased their AccessPORT from another vendor.

Watch this video for a demonstration of the simple AccessPORT installation procedure, utilizing the MazdaManiac calibrations:

AccessPORT Installation Video

Basic information on the Cobb AccessPORT can be read here: Cobb AccessPORT for the RX-8

The Cobb sub-forum for the AccessPORT for the RX-8 is here: CobbTuning RX-8 Forum

The "Quick Start" guide can be downloaded here: AccessPORT Getting Started

*All prices subject to change. All parts, calibrations and upgrades are offered "as is". Payment must be made in full at time of order. Checks or money orders are accepted, but must clear before order is initiated. Google Checkout and money transfers are also accepted. Purchaser must pay all additional fees incurred by the transaction. ALL SALES ARE FINAL. NO RETURNS, NO REFUNDS. MazdaManiac does not offer expressed or implied warranty on any parts, kits or calibration files offered and accepts no responsibility for any damages, either direct or consequential, caused by the use of these parts or calibration files. For North-American models ONLY. Available to customers in the United States, its territories and Canada ONLY.

©2008 MazdaManiac.com

07-15-2008, 05:11 PM	#1
mazdamaniac Rotary Fan in Training Join Date: Jul 2008 Location: Under my car Posts: 99 Rep Power: 17	AccessPORT for the RX-8 The Cobb AccessPORT for the RX-8 is now available. This device supersedes any and all engine management devices for the RX-8. It essentially turns your OE PCM into a tightly integrated stand-alone engine management system. All fuel and ignition tables can be customized for any application - including all forms of forced induction - and most of the auxiliary functions can be adjusted to suit. Oil metering, MAF/IAT/EcTS mapping, idle speed, rev limit, cooling fan on/off, accelerator pedal mapping, closed-loop operation, injector scaling and latency, ignition dwell, knock sensor limits, warm-up limits and S-DAIS operation are all independently adjustable and all CEL functions can be disabled as needed through the Calibration Service offered by MazdaManiac and included with every MazdaManiac AccessPORT purchase. The Cobb AccessPORT is now available for all North American models, both manual and automatic 2004 - 2007. The Cobb AccessPORT is now available for all Asian and European Models as well! Custom Calibrations are now available for those that have purchased their AccessPORT from another vendor. Watch this video for a demonstration of the simple AccessPORT installation procedure, utilizing the MazdaManiac calibrations: AccessPORT Installation Video Basic information on the Cobb AccessPORT can be read here: Cobb AccessPORT for the RX-8 The Cobb sub-forum for the AccessPORT for the RX-8 is here: CobbTuning RX-8 Forum The "Quick Start" guide can be downloaded here: AccessPORT Getting Started All prices subject to change. All parts, calibrations and upgrades are offered "as is". Payment must be made in full at time of order. Checks or money orders are accepted, but must clear before order is initiated. Google Checkout and money transfers are also accepted. Purchaser must pay all additional fees incurred by the transaction. ALL SALES ARE FINAL. NO RETURNS, NO REFUNDS. MazdaManiac does not offer expressed or implied warranty on any parts, kits or calibration files offered and accepts no responsibility for any damages, either direct or consequential, caused by the use of these parts or calibration files. For North-American models ONLY. Available to customers in the United States, its territories and Canada ONLY. ©2008 MazdaManiac.com __________________ Last edited by mazdamaniac; 12-25-2008 at 03:46 AM.*