Project86- My first (and probably not the last) Rebuild

[project86]

Originally Posted by TitaniumTT

Kyle......

While Mazdatrix is usually totally useless and talking to them makes we want to punch kittens, the one good FAQ they have is bearing replacement. You can get the new bearings AND races for ~$60 for both sides (at least that's what I remember my cost was locally, I could be wrong) and then you just knock the old races out and replace EVERYTHING... they basically come out just like new.... good shit... I didn't look at the pics, but unless the hubs are bent and or cracked, no worries, they will be like new once the bearings are replaced.

BTW - respond to mah PM!!!

I think I'm just gonna drill the stupid things out. Will standard drill bits do the trick or do i need to go get new ones for drilling stuff out? AAAAANNNNDDDDDDD thanks for the new bearing suggestion! Im gonna get all up in that.

Also... MY BAD! I guess i forgot to check my internet mailz

Originally Posted by chibikougan

If those are mine they are off a 91 too mang.

I believe they are from yours actually.

Another separate question... is there a good non standard cleaning chemical that you use to clean up old parts... like rotors and housings?