Why no fit?

vrracing · 12-27-2013, 02:10 PM

It's 90 S5 vert.

Ted, I did a couple of searches on how wheels are measured and both DiscountTire and Gemplers says its from bead seat to bead seat. That makes sense to me as the bead seat is the interface to the tire. So assuming the rim/flange is 1/2" a 9.5" wheel will have a total width of 10.5".

Of course that realization totally negates my calculations in that previous post.

Here are some shots of the front wheel measurements. My wife doesnt wait for the iPhone to focus and she wears weird socks.

TOTAL WIDTH

BEAD WIDTH

HUB TO INSIDE EDGE

And the rear

TOTAL WHEEL WIDTH

BEAD WIDTH

HUB TO INSIDE EDGE

12-27-2013, 02:10 PM	#7
vrracing Rotating Assembly Join Date: Oct 2008 Location: TX Posts: 102 Rep Power: 17	It's 90 S5 vert. Ted, I did a couple of searches on how wheels are measured and both DiscountTire and Gemplers says its from bead seat to bead seat. That makes sense to me as the bead seat is the interface to the tire. So assuming the rim/flange is 1/2" a 9.5" wheel will have a total width of 10.5". Of course that realization totally negates my calculations in that previous post. Here are some shots of the front wheel measurements. My wife doesnt wait for the iPhone to focus and she wears weird socks. TOTAL WIDTH BEAD WIDTH HUB TO INSIDE EDGE And the rear TOTAL WHEEL WIDTH BEAD WIDTH HUB TO INSIDE EDGE __________________ 90 S5 Vert. JDM Tii with BNR Stage1 turbo. Pineapple Racing street port. Bonez cat-forward. Corksport cat-back with Vibrant UltraQuiet resonator. RTek 2 wZeitronix w/b. HKS EBC. Vis CF Tii hood. 3000GT wing. Ground Control coilover kit with KYB AGX shocks. Red and Black leather RX8 seats. Corksport Odura lip & bumper caps, OEM Tii skirts