12A tank with EFI

Whizbang · 01-18-2013, 08:11 PM

So i need some input on how to resolve this.

Basically, I cannot use a fuel cell, swirl pot, etc. I have an external pump arrangement already and I just need to connect my fuels lines to the tank, somehow.

I have considered just running the 3/8 nipple as my feed. and just reducing down to that 5/16 looking nipple for my return and keep the vent the same.

Another alternative could be to many drill for a bulkhead fitting and then run another line down into the tank, but REALLY don't wanna do that. Seems like a pain to get the shavings out.

01-18-2013, 08:11 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	12A tank with EFI So i need some input on how to resolve this. Basically, I cannot use a fuel cell, swirl pot, etc. I have an external pump arrangement already and I just need to connect my fuels lines to the tank, somehow. I have considered just running the 3/8 nipple as my feed. and just reducing down to that 5/16 looking nipple for my return and keep the vent the same. Another alternative could be to many drill for a bulkhead fitting and then run another line down into the tank, but REALLY don't wanna do that. Seems like a pain to get the shavings out. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook