87T2 Major Overhaul :: Highlight Reel

stylEmon · 04-13-2008, 01:39 PM

thanks. I may go to a physical intercooler in the future. But so far, the AI is WAY better than the stock intercooler. The best part about using only AI is, there is not pressure drop between the turbo and throttle body.

Basically, you simply take the TB linkage off, and put it back on, backwards. A bracket was made to lock the cable in place (see image). The hard part was, cutting the cable and re-solder the metal tip back on... but make sure the cable is cut at the correct length. The metal piece that you have to re-solder, is the piece that hooks around the throttle linkage. Hope that helps.

04-13-2008, 01:39 PM	#6
stylEmon Rotary Fanatic Join Date: Feb 2008 Posts: 125 Rep Power: 18	thanks. I may go to a physical intercooler in the future. But so far, the AI is WAY better than the stock intercooler. The best part about using only AI is, there is not pressure drop between the turbo and throttle body. Basically, you simply take the TB linkage off, and put it back on, backwards. A bracket was made to lock the cable in place (see image). The hard part was, cutting the cable and re-solder the metal tip back on... but make sure the cable is cut at the correct length. The metal piece that you have to re-solder, is the piece that hooks around the throttle linkage. Hope that helps. __________________ See the Rebuild Process Here Curious About Deadband Timing? The BLACK BEAST is For Sale Last edited by stylEmon; 04-13-2008 at 06:44 PM.