|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
|
Thread Tools | Display Modes |
|
|
#23 |
|
The Newbie
Join Date: Jul 2010
Location: Austin
Posts: 12
Rep Power: 0 ![]() |
Can we talk a little more about simple spring/strut combos v. coil over setups? I have an 85 1st gen and she is tilting in the back (which I think may have compressed the brake line, no bueno). I took the wheel off and jacked it up, nothing is visibly broken, but it's getting a little crusty and I was considering replacing the shocks and either the coils or looking at a simple spring/strut combo. I have read through the manual and see how to make the swap, but in shopping for parts (the readily available ones sitting at autozone of somewhere of the like) I see that shocks are easy to find, but coils are not, would it be easier if I looked for the spring/strut combo?
I drive the car as a daily driver and with less than 60k original miles I would like to continue to do so for a while, so I am considering replacing shocks + coil or coil/strut combo in at least the rear of the car, perhaps front and rear. I 'think' I understand how to make the repair, but I would love some advise on solid parts suitable for everyday driving, and maybe not a million bucks ![]() Thanks, Sarah |
|
|
|
| Bookmarks |
|
|