Project86- My first (and probably not the last) Rebuild

***TitaniumTT*** · 02-23-2010, 12:12 AM

I will offer 2 options..... one, buy a core, JDM, blown, whatever, and send it off to CPR. Here's why, Howard says the parts won't cost over $700, and the rebuild rates are reasonable as well. That would be one of the cheapest.

I can rebuild it for you as well, my approach is slightly different than Howards and I have my reasons as I'm sure he has his. Depending on the parts that are needed, I could be cheaper, or I could be more expensive, depends on your core.

Personally, I'm always one to do it myself. The ONLY two things that I haven't done to my car myself were tinting the windows, and installing the front windshield, the windshield was an insurance thing too

Up to you, what are you looking for in terms of power? Have you given any thought to porting? Portmatching? Thermal coatings? Preliminary research on turbo's?

02-23-2010, 12:12 AM	#11
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I will offer 2 options..... one, buy a core, JDM, blown, whatever, and send it off to CPR. Here's why, Howard says the parts won't cost over $700, and the rebuild rates are reasonable as well. That would be one of the cheapest. I can rebuild it for you as well, my approach is slightly different than Howards and I have my reasons as I'm sure he has his. Depending on the parts that are needed, I could be cheaper, or I could be more expensive, depends on your core. Personally, I'm always one to do it myself. The ONLY two things that I haven't done to my car myself were tinting the windows, and installing the front windshield, the windshield was an insurance thing too Up to you, what are you looking for in terms of power? Have you given any thought to porting? Portmatching? Thermal coatings? Preliminary research on turbo's? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**