New FD Door Light Switch

cewrx7r1 · 11-06-2008, 02:03 PM

The door switches are used for both lighting and the alarm system.
When the door opens, the switch makes contact and grounds the circuit to the chassis.

The original ones were cheapy made Protege units. There now are replaced with high grade newer design switches.
The new part number is: LC11-66-540 and cost $21 for two.
These have a large male spade connector on them which is different than original but there is a very easy fix. The original wire connector is actually a large female spade with a large to small male adapter inserted into it. Just remove it and all it good.

11-06-2008, 02:03 PM	#1
cewrx7r1 The Judge Join Date: Feb 2008 iTrader: (0) Posts: 196 Rep Power: 17	New FD Door Light Switch The door switches are used for both lighting and the alarm system. When the door opens, the switch makes contact and grounds the circuit to the chassis. The original ones were cheapy made Protege units. There now are replaced with high grade newer design switches. The new part number is: LC11-66-540 and cost $21 for two. These have a large male spade connector on them which is different than original but there is a very easy fix. The original wire connector is actually a large female spade with a large to small male adapter inserted into it. Just remove it and all it good.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode