Post TB cleaning Bog

David Holmes III · 03-05-2008, 11:16 PM

Hey guys...
After seafoaming, I cleaned the Throttle Body by spraying Deep Creep, and using a brush . After the cleaning I went to start the car and it reved up to the normal 3000, but then instead of steadily dropping it bogged down. The smoke was quite prevalent. When I try and start it, it will fire for a second, but bog down again. After letting it sit for about 45 minutes, it started up to 3000 and then bogged, with the immediate boggs after that.

As of now, Im going to let it sit overnight, and try tomorrow. If you have any ideas ,or if I did something terribly wrong, please let me know.

Is it possible than any of the deposits I freed up traveled down and clogged something?

03-05-2008, 11:16 PM	#1
David Holmes III The Newbie Join Date: Feb 2008 Location: Chattanooga ,TN Posts: 17 Rep Power: 0	Post TB cleaning Bog Hey guys... After seafoaming, I cleaned the Throttle Body by spraying Deep Creep, and using a brush . After the cleaning I went to start the car and it reved up to the normal 3000, but then instead of steadily dropping it bogged down. The smoke was quite prevalent. When I try and start it, it will fire for a second, but bog down again. After letting it sit for about 45 minutes, it started up to 3000 and then bogged, with the immediate boggs after that. As of now, Im going to let it sit overnight, and try tomorrow. If you have any ideas ,or if I did something terribly wrong, please let me know. Is it possible than any of the deposits I freed up traveled down and clogged something? __________________ 88 GXL ,S4 ,New Engine, New Trans, RB Header, High Flow Cat, New AAS components, New 4 piston Calipers, PPI Audio system (Art Series)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode