Go Back   Rotary Car Club > Tech Discussion > Show your rotary car build up.
Reload this Page FC Zach's '87 Sport
Home Forum Classifieds Register FAQ Members List Calendar Mark Forums Read

Show your rotary car build up. Show off your Rotary Car build!

 
 
Thread Tools Display Modes
\r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n
\r\n __________________
\r\n 1993 Yamaha GTS1000
\r\n1992 Celica Turbo AllTrac
\r\n1987 RX7 Sport
\r\n1979 Yamaha G1, KM24 powered
\r\n1975 Dolmar KMS4\r\n
\r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n \r\n\r\n\r\n \r\n FC Zach is offline\r\n\r\n\r\n \r\n \r\n \r\n \r\n  \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n\r\n\r\n\r\n\r\n'; pd[340218] = '\r\n\r\n \r\n\r\n
\r\n
\r\n
\r\n\r\n
\r\n \r\n\r\n\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n\r\n\r\n \r\n \r\n \r\n\r\n
\r\n \r\n Old\r\n 03-02-2017, 10:13 AM\r\n \r\n \r\n \r\n  \r\n #2\r\n \r\n
\r\n\r\n
\r\n \r\n TitaniumTT\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n
\r\n __________________
\r\n -The Angry Stig-
\r\nDGRR 2009, 2011, 2012 & 2013 - Best FC
\r\n
\r\nDEALS GAP!! WOOHOOOO!!!!!
\r\n
\r\n2015 Audi S4 - Samantha - Zero Brap S4
\r\n2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
\r\n2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO\'s! So it begins
\r\n1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG\'s - Rotary Tow Vehicle
\r\n1988 \'Vert - In progress
\r\n1988 FC Coupe - Gretchen -The attention whore BEAST!
\r\n
\r\n
\r\nI\'m a sick individual, what\'s wrong with you?
\r\nI\'m pure Evil
\r\nI\'m still insane, in the best possible way.
\r\nI think Brian\'s idea of romance is using lube.
\r\nYour rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
\r\nYou win with your thread. Most everything
\r\nIt\'s a truck with a steel gate on the back. Just a statement of fact
\r\n
\r\nMotec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
\r\nNo Bolt-ons allowed. Dyno\'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
\r\n-Angry Motherf*cker Mode ENGAGED-\r\n
\r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n
\r\n TitaniumTT is offline\r\n\r\n\r\n \r\n \r\n \r\n \r\n  \r\n \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
\r\n \r\n
\r\n
\r\n
\r\n\r\n\r\n\r\n'; pd[340481] = '\r\n\r\n \r\n\r\n
\r\n
\r\n
\r\n\r\n
\r\n \r\n\r\n\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n\r\n\r\n \r\n \r\n \r\n\r\n
\r\n \r\n Old\r\n 03-07-2017, 11:19 AM\r\n \r\n \r\n \r\n  \r\n #17\r\n \r\n
\r\n\r\n
\r\n \r\n infernosg\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n
\r\n __________________
\r\n \'90 GTUs
\r\nStay up to date with my photography
\r\n\'06 Toyota Highlander Hybrid
\r\n\'10 Toyota Prius
\r\n
\r\n"Initial Success or Total Failure"\r\n
\r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n
\r\n project86 is offline\r\n\r\n\r\n \r\n \r\n \r\n \r\n  \r\n \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
\r\n \r\n
\r\n
\r\n
\r\n\r\n\r\n\r\n'; pd[340579] = '\r\n\r\n \r\n\r\n
\r\n
\r\n
\r\n\r\n
\r\n \r\n\r\n\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n\r\n\r\n
\r\n \r\n Old\r\n 03-08-2017, 07:24 PM\r\n \r\n \r\n \r\n  \r\n #32\r\n \r\n
\r\n\r\n
\r\n \r\n FC Zach\r\n
Prev Previous Post   Next Post Next
Old 03-06-2017, 04:48 AM   #11
FC Zach
RCC Loves Me Not You
 
FC Zach's Avatar
 
Join Date: Mar 2008
Location: Eagleville, TN
iTrader: (2)
Posts: 2,267
Rep Power: 19
FC Zach is on a distinguished road
Default
So I swapped the clutch and installed the rebuilt transmission this weekend. The Centerforce Dual Friction I removed appears to still have a lot of life left on it, is there still a market for these? I'd sell it cheap if there's any interest in it.

I am waiting on oil I ordered from my AmsOil guy and an output shaft seal from Atkins Rotary to arrive so I can button everything up. I tried getting this seal locally from Oreillys but for whatever reason neither of the manual or auto seals were correct. . They couldn't cross-reference it either but luckily Atkins pulled through


I had to remove the fancy coil mount kit to remove the long starter bolt and as I laid it to the side I felt something protruding from one of the coil-to-plug adapters. . here's what I found:

One of the detents for the plug weren't seated completely and the bad connection caused it to get hot enough to melt almost completely through the plastic housing.


I'm no longer going to be using the COP adapters and will be replacing them with tailored wired. I'll still use the coil mount, just not as it was intended.

Since the power harness was mostly disconnected, I completely removed it with hopes of replacing it with a new harness (mine is in very rough shape). I contacted Chris Ludwig to see if he can do this, if not does anyone have any recommendations on where this can be built or purchased?
__________________
1993 Yamaha GTS1000
1992 Celica Turbo AllTrac
1987 RX7 Sport
1979 Yamaha G1, KM24 powered
1975 Dolmar KMS4
FC Zach is offline   Reply With Quote
 

Bookmarks

« Previous Thread | Top | Next Thread »
Thread Tools
Display Modes
Threaded Mode Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:40 PM.

Contact Us - Rotary Car Club - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com
Ad Management by RedTyger