|
Non Rotary related items If you have non rotary related car items for sale list them here. No spammers! |
|
Thread Tools | Display Modes |
02-13-2014, 04:52 PM | #1 |
IT'S ALIVE!
|
FS: 2-1/16" Gauges
Going with a different setup so I don't need these anymore. They were installed on my red FC for close to two years but the car never actually ran. Detailed information on the gauges can be found here: http://www.marshallinstruments.com/c.../scx_black.cfm.
Otherwise, here's the general info: Brand: Marshall Instruments Line: SCX (black on black) Type: Electric, 270-degree sweep Gauges: Oil temperature, oil pressure, and water temperature Illumination: Red or white Pointer: Red Other features: Peak recall, high/low warning, warning 12V output, remote calibration button Included is the gauge, flying lead harness, sending unit, and instructions. I only have one set of instructions for the temperature gauges as the setup is identical. Full disclosure: one of the leads to one of the remote calibration buttons has separated (see below) but that's easily fixable with some solder and heat shrink tubing. I can fix this before shipping if needed. Asking price: $70 each or $180 for all three. I also have a generic universal metal gauge pod I'll throw in for free with purchase of all three gauges. Otherwise it's $20. Last edited by infernosg; 06-13-2014 at 06:55 PM.. |