\r\n __________________ \r\n what I have: \r\n1985 Gs:12a All motor Drag car - 1973 Rx2: Play car \r\nWhat I had: \r\n93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2\r\n
Im looking to boost prep my 51ida weber (7-10psi max on stock s5 turbo). From what I read I need to do 2 things for sure.*
1. Vent the fuel bowl into the carb hat so it sees the equal pressure. (Line from fuel bowl to carb hat area?)
2. Swap the brass float for a plastic float. Because the brass float will crush above 6psi. The plastic float is good until 20psi.
Other things I have read are unclear. Its obvious that i need to seal any and all areas that can leak. But what areas do these include?*
1. What else besides the "hat" needs to be a sealed?
2. Do I have to seal the throttle shaft?
3. Is there any other modifications to the weber that need to be addressed?*
I have everything else ready to go. I just want to be sure I get my weber in order before setting it all up.
__________________ what I have:
1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had:
93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2