BNR stage 3's (470whp 400tq)

[ball joint]

I haven't had a had chance to completely dial in my tune since I fitted the 4" thick ETS front mount, AEM coils, and external wastegate but I had a chance to dyno the car on Slow Motion Motorsports Dynapack (which is the same dynapack Logan at Defined tunes on). Needless to say; was happy with the results but I know there's still more in it as I was only running 19psi for this pull. I was getting breakup at high RPM as it's still too rich up top but I was still able to get the peak power and torque numbers before it started to breakup at high RPM.

Here's the link to the original thread from when I broke the BNR record which has more details about the build.http://www.rx7club.com/time-slips-dy...record-971246/

If you're curious about the external wastegate on the stock frame turbos here's that thread as well.
http://www.rx7club.com/3rd-generatio...-done-1000553/

Time to update this part of your website :-)
"The BNR Stage 3's have the world record on most RWHP made off bolt up hybrid turbochargers for the RX7! 426 RWHP and 365 RWTQ was made at 18 psi of boost! "