s5 TII fuel pressure question

		Rotary Car Club > Tech Discussion > RX-7 2nd Gen Specific (1986-92)
s5 TII fuel pressure question

RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections.

\r\n

\r\n\r\n

\r\n \r\n\r\n\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n\r\n\r\n \r\n \r\n \r\n\r\n

\r\n \r\n \r\n 06-12-2011, 09:07 PM\r\n \r\n \r\n	\r\n \r\n #2\r\n \r\n
\r\n\r\n \r\n \r\n RETed\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n __________________ \r\n \r\n\'15 Juke Nismo \r\n\'06 MX-5 GT SOLD \r\n\'04 S Silver RX-8 GT Track Day Use SOLD \r\n\'90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD \r\n\'89 GTUs 6p TII SOLD, \'87 sport SOLD, \'79 SA stock SOLD \r\n\'91 B2600i 4x4 w/ Rx-8 LSD SOLD \r\n\r\n \r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n
\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n	\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n

\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n

\r\n \r\n

\r\n

\r\n\r\n

\r\n \r\n\r\n\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n\r\n\r\n

\r\n \r\n

\r\n 06-19-2011, 10:15 AM\r\n \r\n \r\n

\r\n \r\n #17\r\n \r\n

\r\n\r\n

\r\n \r\n FRED\r\n

06-19-2011, 10:15 AM	#17
FRED Rotary Fan in Training Join Date: Mar 2011 iTrader: (0) Posts: 73 Rep Power: 14	Your last video on post #13..............From your words on the video you start out with the engine running............13 plus vdc...........evidently the vacuum line is not connected to the FPR and the FPR is reading 50psi on your gauge. Again, a stock car with the pump running and no vacuum to the FPR should read approx 37-39 psi and your reading 50 psi. Then you apply pressure to the FPR and the gauge reads 10 psi higher i.e. 60psi. From what I've seen in the past on a stk car the pressure will read 37-39 psi with no vac to the FPR and if you apply pressure with a Mittyvac to the FPR the reading will go up to 50 psi. In fact no matter how much more pressure you apply the things never went more than 50 psi if memory is correct. If it were me I'd borrow another fuel pressure gauge and see how things are. Seems many of your readings are approx 10 psi higher than what I've seen in the past. Gauge??????? Last edited by FRED; 06-19-2011 at 10:21 AM..

Bookmarks