Oem Electrical Connectors

JustJeff · 03-02-2011, 01:01 AM

I'm rebuilding my harness. I was thinking ahead and snipped the water thermo plug (Green rectangular two pin one on the back of the water pump) from a junkyard. That plug is in awesome shape.

My CAS plug is horrible. But I believe I can buy the male terminal pins locally.

Probably going to rebuild my TPS. IIRC the actual male/female plugs are good. But being a N/A harness converted for a turbo swap, the wires were extended and while it's out I want to make sure the patch is in good shape.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-02-2011, 01:01 AM	#14
JustJeff RCC Contributor Join Date: Mar 2008 Posts: 505 Rep Power: 18	I'm rebuilding my harness. I was thinking ahead and snipped the water thermo plug (Green rectangular two pin one on the back of the water pump) from a junkyard. That plug is in awesome shape. My CAS plug is horrible. But I believe I can buy the male terminal pins locally. Probably going to rebuild my TPS. IIRC the actual male/female plugs are good. But being a N/A harness converted for a turbo swap, the wires were extended and while it's out I want to make sure the patch is in good shape.