Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

***TitaniumTT*** · \r\n \r\n \r\n 03-31-2010, 09:09 AM\r\n \r\n \r\n

Quote:

Originally Posted by project86

lol... i try and try to follow this thread but if i miss even ONE day of check up on it there are already like 7 more pages added... and then i have to read alot.....hahaha

Just wait a few more days till I get this winter job out of the way, parts galore come in Monday, tranny and rear tuesday etc etc... Next week will be FILLED with updates, hopefully daily. Heading there right now actually to get some more wiring done...... after I spent the morning doing marine wiring, it's off to do automotive wiring.... it never ends!

Quote:

Originally Posted by classicauto

I would tend to believe the iunductives will do better in this case also. Although a different coil, my inductive setup on the TECgt is monstrously powerful. I can't quantify it due to the lack of back to back's, but in comparison to other systems I've ran including two jacobs leading coils and seperate jacob's amps on each (can you say welding arc?) this system stacks up well. I am inclined to think the level that inductive's would run out of steam on is probably quite high. Super anxious to see the results of this setup though.

I heart M&W btw

Oh, and who did the plug wires??

I agree with you Joe. Unless there's TONS of meth and boost to the point where an inductive doesn't have the energy to spark, I think inductives will do much better for a rotary. But we'll see. The FD will most likely see alot more boost and meth as well so I suspect I'll be repeating the test with the winning coil vs the winning CDI.

I love some M&W as well, I'm curious, I hope I don't hurt any feelings

The pulg wires were built by the engineer @ MoTeC that owns the equipment. I've got at least one more order to place with them before this car is done, so what I plan to do is order ~20' of that wire, and all new boots and terminals as well and all new plug wires using the same wire for each. This way someone that sells says the D585's in a kit can't claim that it was the wires that caused those coils to come in where they did, if that happens to be the case.

Where the Hell is Bill BTW???? I need coils from him.

Aight rotards, off to dive into some more TC/chassis/PD wiring.....

\r\n \r\n \r\n 03-25-2010, 09:38 PM\r\n \r\n \r\n	\r\n \r\n #2\r\n \r\n
\r\n\r\n \r\n \r\n *TitaniumTT\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n __________________ \r\n -The Angry Stig- \r\nDGRR 2009, 2011, 2012 & 2013 - Best FC \r\n \r\nDEALS GAP!! WOOHOOOO!!!!! \r\n \r\n2015 Audi S4 - Samantha - Zero Brap S4 \r\n2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter \r\n2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO\'s! So it begins \r\n1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG\'s - Rotary Tow Vehicle \r\n1988 \'Vert - In progress \r\n1988 FC Coupe - Gretchen -The attention whore BEAST! \r\n \r\n \r\nI\'m a sick individual, what\'s wrong with you? \r\nI\'m pure Evil \r\nI\'m still insane, in the best possible way. \r\nI think Brian\'s idea of romance is using lube. \r\nYour rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. \r\nYou win with your thread. Most everything \r\nIt\'s a truck with a steel gate on the back. Just a statement of fact \r\n \r\nMotec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... \r\nNo Bolt-ons allowed. Dyno\'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. \r\n-Angry Motherfcker Mode ENGAGED-\r\n \r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n
\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n	\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n

\r\n \r\n \r\n 03-27-2010, 11:43 AM\r\n \r\n \r\n	\r\n \r\n #17\r\n \r\n
\r\n\r\n \r\n \r\n project86\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n __________________ \r\n For current updates and event coverage check out \r\nFollow on Twitter! @WhizbangRally \r\nWhizbang Rally\'s Webpage \| Facebook\r\n \r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n
\r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n	\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n