Thoughts on ACT clutch combos

Jeff20B · 11-15-2009, 12:57 PM

A 215mm setup. The disc is a smaller diameter for less inertia and higher burst strength. Grips less than a 225mm setup, but works fine for lower power levels. For example the 225mm setup described above boasts 268ft/lbs of torque holding capacity. The 215mm version holds 232ft/lbs. Unfortunately ACT stopped making them but some distributors still have them on the shelf. The disc is part number 3000205 and the HD pressure plate is MZ-016. The Xtreme version is MZ-016X. Not sure what the complete kit part number is.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-15-2009, 12:57 PM	#29
Jeff20B Rotary Fanatic Join Date: Mar 2008 Posts: 215 Rep Power: 18	A 215mm setup. The disc is a smaller diameter for less inertia and higher burst strength. Grips less than a 225mm setup, but works fine for lower power levels. For example the 225mm setup described above boasts 268ft/lbs of torque holding capacity. The 215mm version holds 232ft/lbs. Unfortunately ACT stopped making them but some distributors still have them on the shelf. The disc is part number 3000205 and the HD pressure plate is MZ-016. The Xtreme version is MZ-016X. Not sure what the complete kit part number is.