injector buy question

low compression · 06-03-2009, 04:56 PM

I was just wondering where most people have bought injectors from. No ebay or venom. Looking for four 720s of good quality for the best price. s4 by the way

low compression · 06-03-2009, 08:52 PM

Is rx7 stores greddy at 140 a piece a good price

vex · 06-03-2009, 09:02 PM

Or just buy used and ship 'em to get cleaned and flow tested?

Flooder · 06-04-2009, 05:07 PM

I can get you the greddy injectors for cheaper than that. I can also get you a good deal on these injectors as well.

http://www.deatschwerks.com/catalog/...roducts_id=205

They come in 550, 750, 880 and 1600. Let me know!

Justen · 06-23-2009, 12:56 AM

i got my 1600 as my secondaries off ebay. They were new (i wouldnt buy used off ebay either). just make sure to go for a brand name, bosch or denso ect. And makke sure they give you a correct part number from the manufacturer.

Justen · 06-23-2009, 01:00 AM

...And if you buy used injectors and they don't pass specs in flow testing... well then where do you stand? you just payed for old crappy injectors, then payed to have them flow tested and cleaned, and you still don't have usable parts.
My suggestion is to just buy new in the first place

RotaryProphet · 06-23-2009, 01:51 PM

Summit sells 72lb/hr injectors for $50ea; never used this brand, but was planning to give them a shot on my next build.

http://www.summitracing.com/parts/TFS-89072-1/

djmtsu · 06-23-2009, 03:08 PM

You can also go with RC Engineering. Never heard anything bad about their injectors or service.

06-03-2009, 04:56 PM	#1
low compression The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 25 Rep Power: 0	injector buy question I was just wondering where most people have bought injectors from. No ebay or venom. Looking for four 720s of good quality for the best price. s4 by the way

06-03-2009, 09:02 PM	#3
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	Or just buy used and ship 'em to get cleaned and flow tested? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

06-04-2009, 05:07 PM	#4
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	I can get you the greddy injectors for cheaper than that. I can also get you a good deal on these injectors as well. http://www.deatschwerks.com/catalog/...roducts_id=205 They come in 550, 750, 880 and 1600. Let me know! __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

06-23-2009, 03:08 PM	#8
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	You can also go with RC Engineering. Never heard anything bad about their injectors or service. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

06-03-2009, 08:52 PM	#2
low compression The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 25 Rep Power: 0	Is rx7 stores greddy at 140 a piece a good price

06-23-2009, 12:56 AM	#5
Justen In Too Deep Join Date: Jun 2009 Location: Clifton, NJ iTrader: (3) Posts: 112 Rep Power: 16	i got my 1600 as my secondaries off ebay. They were new (i wouldnt buy used off ebay either). just make sure to go for a brand name, bosch or denso ect. And makke sure they give you a correct part number from the manufacturer.

06-23-2009, 01:00 AM	#6
Justen In Too Deep Join Date: Jun 2009 Location: Clifton, NJ iTrader: (3) Posts: 112 Rep Power: 16	...And if you buy used injectors and they don't pass specs in flow testing... well then where do you stand? you just payed for old crappy injectors, then payed to have them flow tested and cleaned, and you still don't have usable parts. My suggestion is to just buy new in the first place

06-23-2009, 01:51 PM	#7
RotaryProphet Rotary Fanatic Join Date: Sep 2008 iTrader: (0) Posts: 147 Rep Power: 17	Summit sells 72lb/hr injectors for $50ea; never used this brand, but was planning to give them a shot on my next build. http://www.summitracing.com/parts/TFS-89072-1/