Garfinkle Coil Relocation Bracket!

AHarada · 02-24-2009, 08:33 PM

I recieved my Garfinkle Coil Relocation bracket today. I requested one to be used with the stock 3rd gen coil. He also offers one for use with the 2nd gen leading coil.

I am impressed once again with Garfinkle's work. Quality is the BEST as always with Garfinkle. The piece is beautiful.

Backside. This side bolts to the chassis under the steering rack.

Front side. This side is where the coils bolt to.

The bracket mounts to the chassis with threaded inserts.

Mock-up with coils.

I will update this thread with more pictures as the install progresses.

Included with the bracket was instructions written by Garfinkle. Here's a short excerpt from them.

"The plate was made to mount the coils away from the motor's heat and to shorten the spark plug wires. The place I used for several years was below the steering shaft on the left side of the car."

Check this thread for more pictures:

http://rotarycarclub.com/rotary_foru...ead.php?t=5976

dregg100 · 02-25-2009, 10:27 AM

that is very very nice, i will be ordering one of those today!

Garfinkles Motor Works · 02-25-2009, 10:25 PM

Both styles are ready to ship

FDguy · 05-11-2012, 08:35 PM

From the grave but don't care this is an awesome product!

Here is where I installed mine

Garfinkles Motor Works · 05-20-2012, 01:33 AM

Thanks for the post and picture .

02-24-2009, 08:33 PM	#1
AHarada Rotary Fanatic Join Date: Mar 2008 Posts: 162 Rep Power: 17	Garfinkle Coil Relocation Bracket! I recieved my Garfinkle Coil Relocation bracket today. I requested one to be used with the stock 3rd gen coil. He also offers one for use with the 2nd gen leading coil. I am impressed once again with Garfinkle's work. Quality is the BEST as always with Garfinkle. The piece is beautiful. Backside. This side bolts to the chassis under the steering rack. Front side. This side is where the coils bolt to. The bracket mounts to the chassis with threaded inserts. Mock-up with coils. I will update this thread with more pictures as the install progresses. Included with the bracket was instructions written by Garfinkle. Here's a short excerpt from them. "The plate was made to mount the coils away from the motor's heat and to shorten the spark plug wires. The place I used for several years was below the steering shaft on the left side of the car." Check this thread for more pictures: http://rotarycarclub.com/rotary_foru...ead.php?t=5976

02-25-2009, 10:27 AM	#2
dregg100 Rotary Fanatic Join Date: Feb 2008 Posts: 432 Rep Power: 18	that is very very nice, i will be ordering one of those today! __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

02-25-2009, 10:25 PM	#3
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Both styles are ready to ship

05-11-2012, 08:35 PM	#4
FDguy No need for 5.0L Join Date: Jan 2011 Location: San Antonio TX Posts: 44 Rep Power: 0	From the grave but don't care this is an awesome product! Here is where I installed mine

05-20-2012, 01:33 AM	#5
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Thanks for the post and picture .