My 38K mile 93 SSM build - Page 2

fire85gslse · 11-23-2008, 09:18 PM

Quote:

Originally Posted by Chadwick

See you decided to pull the motor. Makes the work you are doing a lot easier. David is the turbo porting master. Work looks great.

Dan

yep pulled it the next day after talking with you. Will go back in complete and ready.

Brent · 11-23-2008, 11:47 PM

Looks great so far Chad! Can't wait to see it all finished up!

Terrh · 11-29-2008, 04:21 PM

hey, I think we had a bit of a chat at deal's gap!
I was with the canadians, had the skyline GTR.

Thanks for the link to the WG porting, hopefully I'll be taking my FD to the gap next spring.

fire85gslse · 12-02-2008, 01:07 PM

more motor pics as she is coming along

rx7 vinnie · 12-03-2008, 09:22 PM

I want your unmolested car soooooo bad.

Garfinkles Motor Works · 12-11-2008, 09:37 AM

A new rats nest has been made with four valves ,Chad will post pics of it soon .

HDP · 01-01-2009, 08:09 PM

Updates?...

fire85gslse · 01-08-2009, 12:15 AM

Well fuel system is done, new rats nest built, oil pan brace on, and motor ready to go in this weekend.

therighthand · 02-07-2009, 02:27 AM

Any plans to produce the hard lines for the solenoids?

Chadwick · 02-07-2009, 07:47 AM

Quote:

Originally Posted by therighthand

Any plans to produce the hard lines for the solenoids?

Yes, contact Garfinkle to have your rack modified. Well worth the price!

Dan

fire85gslse · 02-15-2009, 11:29 AM

Got my 99 Spec y-pipe back and man it is slick looking

fire85gslse · 02-15-2009, 11:36 AM

Also garfinkle completed this thing...... cant remember what it is called but it sure did clean up and loose a few tubes that were not being used anymore

fire85gslse · 02-15-2009, 11:48 AM

This picture is where the Master Polisher David gave me a few pointers on how to polish, so I sand blasted 3 parts and started to polish one...... not complete but not bad looking for my first time. It was cool to see the part coming to life.
Did not think it took that long to work one part nor that much sanding to make it look good.

Last two pictures is that of the tube that goes to the rear turbo. Garfinkle polished it (cleaned up a little) and some of the unwanted mounts were cut off and sanded out. Became a clean slick looking part! Sorry but I was excited to get it on the car or I would have taken pics before I mounted it.

HDP · 02-15-2009, 01:00 PM

Quote:

Originally Posted by fire85gslse

Got my 99 Spec y-pipe back and man did garfinkle make it slick looking by cutting off the Blow off valve nipple in the middle, welding in a plate and working it to flow with the lines. Then polished it out to make it a work or art. Im going to attempt to polish the upper tube myself so i can get an understanding on the labor it takes and time that is involved in one part.

What BOV will you be using and where will it mount?

fire85gslse · 02-15-2009, 01:28 PM

Quote:

Originally Posted by HDP

What BOV will you be using and where will it mount?

HKS on my elbow as well as my air temp.

11-23-2008, 11:47 PM	#17
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	Looks great so far Chad! Can't wait to see it all finished up! __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

11-29-2008, 04:21 PM	#18
Terrh Rotary Fan in Training Join Date: Mar 2008 Posts: 53 Rep Power: 18	hey, I think we had a bit of a chat at deal's gap! I was with the canadians, had the skyline GTR. Thanks for the link to the WG porting, hopefully I'll be taking my FD to the gap next spring. __________________ 1992 skyline and lots of rx7's.

12-03-2008, 09:22 PM	#20
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) Posts: 743 Rep Power: 18	I want your unmolested car soooooo bad. __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

12-11-2008, 09:37 AM	#21
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	A new rats nest has been made with four valves ,Chad will post pics of it soon .

01-01-2009, 08:09 PM	#22
HDP Rotary Fanatic Join Date: Feb 2008 Location: HuntsVEGAS Posts: 249 Rep Power: 18	Updates?...

02-07-2009, 02:27 AM	#24
therighthand The Newbie Join Date: Oct 2008 Posts: 7 Rep Power: 0	Any plans to produce the hard lines for the solenoids?