Wtf?

85rx-7gsl-se · 10-24-2008, 03:18 PM

Hey guys, my dad just got a 83 FB with 12a. I think the motor locked up. It drove fine last week and started just a few days ago. When I tried to crank it today, nothing. Pulled the starter off and had it tested. Its good. Then I tried to turn the motor over with a ratchet and socket. I pulled the plugs out to make it easier and the starter is still off and the tranny in neutral. I cannot get it to turn over either direction by using the ratchet and socket. Any ideas of what has happened? Broken seal wedged? Bearing failure? Any advice is greatly appreciated. Thanks in advance.

djmtsu · 10-24-2008, 03:24 PM

Get a bigger ratchet!

85rx-7gsl-se · 10-24-2008, 03:29 PM

It shouldn't be real hard though with the plugs out right? I mean most engine I have seen can be turned over by hand. I will get a pipe this weekend to get more leverage tho.

djmtsu · 10-24-2008, 03:32 PM

Something is making it stick. I would say a piece of carbon is lodged in there. Either you will break it loose, or break a seal. Flip a coin!

85rx-7gsl-se · 10-24-2008, 03:39 PM

So just turn it with a breaker bar... Should I try turning it backwards first?

PercentSevenC · 10-24-2008, 04:17 PM

I would try soaking it in MMO rather than risk breaking it if it is just some carbon.

85rx-7gsl-se · 10-24-2008, 04:26 PM

How would I do that? Pour it in the spark plug holes?

brycerxer · 10-24-2008, 04:40 PM

Do NOT force it to turn unless you want to rebuild the engine. Read this before you do anything:

http://www.rx7club.com/showthread.ph...hreadid=281207

Have you considered taking the belts off and trying to turn just the crankshaft? Because usually cars only carbon lock from sitting for long periods. Maybe one of the other componants is locked up such as the air pump, alternator, a/c, water pump, etc.

85rx-7gsl-se · 10-24-2008, 04:58 PM

I will look at that link. I have turned all the accessories and they all turn independently.

djmtsu · 10-24-2008, 05:40 PM

Woops!

Sorry Nate, I forgot the whole MMO thing. Yes put a cap full in the spark plug holes.

REDLINE SE · 10-24-2008, 07:38 PM

Good luck with that.

I like your Sig Pic...

85rx-7gsl-se · 10-27-2008, 08:11 PM

Solved lol... Turns out the slave cylinder bolts were way too long and hitting the flywheel

need RX7 · 10-27-2008, 08:13 PM

Wow, didn't see that one coming. Any damage to the flywheel?

mfisher12 · 10-27-2008, 09:50 PM

if you can't turn it by hand, which should be fairly easy,and it is seized, you are better off tearing the engine down. forcing it to turn over may damage more internal parts than are already damaged. also turning it counter clockwise isn't terribly good for the engine.

mfisher12 · 10-27-2008, 09:52 PM

guess i didn't read the rest of the thread before i posted woops

10-24-2008, 03:24 PM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Get a bigger ratchet! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

10-24-2008, 03:32 PM	#4
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Something is making it stick. I would say a piece of carbon is lodged in there. Either you will break it loose, or break a seal. Flip a coin! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

10-24-2008, 05:40 PM	#10
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Woops! Sorry Nate, I forgot the whole MMO thing. Yes put a cap full in the spark plug holes. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

10-24-2008, 07:38 PM	#11
REDLINE SE BOOSTED 84 GSL-SE Join Date: Sep 2008 Location: Naples, Florida Posts: 57 Rep Power: 18	Good luck with that. I like your Sig Pic... __________________ Babies are bottle fed, real men get BLOWN!

10-27-2008, 08:13 PM	#13
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	Wow, didn't see that one coming. Any damage to the flywheel? __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

10-24-2008, 04:40 PM	#8
brycerxer The Newbie Join Date: Oct 2008 Location: Phoenix, AZ Posts: 22 Rep Power: 0	Do NOT force it to turn unless you want to rebuild the engine. Read this before you do anything: http://www.rx7club.com/showthread.ph...hreadid=281207 Have you considered taking the belts off and trying to turn just the crankshaft? Because usually cars only carbon lock from sitting for long periods. Maybe one of the other componants is locked up such as the air pump, alternator, a/c, water pump, etc.

10-27-2008, 09:50 PM	#14
mfisher12 Rotary Fan in Training Join Date: Oct 2008 Location: SC formally form northern VA Posts: 31 Rep Power: 0	if you can't turn it by hand, which should be fairly easy,and it is seized, you are better off tearing the engine down. forcing it to turn over may damage more internal parts than are already damaged. also turning it counter clockwise isn't terribly good for the engine.

10-27-2008, 09:52 PM	#15
mfisher12 Rotary Fan in Training Join Date: Oct 2008 Location: SC formally form northern VA Posts: 31 Rep Power: 0	guess i didn't read the rest of the thread before i posted woops