my car starts but runs poorly

vex · 09-14-2008, 09:39 PM

Quote:

Originally Posted by maui_boi

k i checked all of it and they work and i disconnected the TPS and it idled good just still getting that bad runing at and after 4000rpm

You checked the spray pattern on the injectors? You checked to make sure they're firing off correctly?

It honestly sounds like your secondaries are clogged. Pull the rail and injectors, use mechanics wire and read the fsm on how to test the spray pattern on the secondaries.

Whizbang · 09-14-2008, 11:39 PM

witchhunter.com

enough said.

maui_boi · 09-15-2008, 01:03 AM

well i only cleaned em for now im gonna test it when i have the time i only had time to clean the injectors but i will keep u guys posted cause this car is giving me problems lol

Whizbang · 09-15-2008, 09:17 AM

how did you clean them? It requires special tools.

vex · 09-15-2008, 10:16 AM

Quote:

Originally Posted by Low Impedance

how did you clean them? It requires special tools.

My thoughts exactly.

Usually, and I mean usually; cleaning injectors require ultra sonic bathing, back flowing, and taking measurements throughout the process to ensure that they are flowing properly.

Flow benching the injectors to +/- some percentage and cleaning them until they reach that percentage. You can not just pour in some injector "cleaner" as that only is alcohol, and doesn't really do much of anything... if at all.

You can get injectors semi-cleaned, but that's mostly just fuel system upkeep where they pour in different cleansers through the system. This is not an injector cleaning!

Injectors are sealed units and as such can only be cleaned certain ways as already mentioned.

maui_boi · 09-15-2008, 02:23 PM

well then i semi cleaned it then i took them out and dipped em and checked for flow and now we just going c if they click which we neva try yet..wat else could be the problem though??

vex · 09-15-2008, 02:34 PM

Quote:

Originally Posted by maui_boi

well then i semi cleaned it then i took them out and dipped em and checked for flow and now we just going c if they click which we neva try yet..wat else could be the problem though??

Dipping them does nothing but remove deposits from the outside of the injectors (and even then it's poor at that). Check the flow and get back to us.
There's no sense in moving forward to another cause until you know that the most likely cause is not it.

maui_boi · 09-16-2008, 01:26 AM

it doesn't spray when we jumped them with 12 volts well we couldn't see any sprays...

maui_boi · 09-16-2008, 01:28 AM

wat do u think could there be a problem with the plugs?

Phoenix7 · 09-16-2008, 01:47 AM

send them to KGparts

http://www.injector-rehab.com/

Love the home page!!!!

maui_boi · 10-13-2008, 05:29 PM

sorrie i havent been on for the longest time but my car starts and runs good now just gotta clean the injectors still yet though cause i can feel it pulling back a little at full throttle but other than that all i did was change the TPS with another cars one and it ran fine after that so im guessing it was a bad TPS

09-14-2008, 11:39 PM	#17
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	witchhunter.com enough said. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

09-15-2008, 09:17 AM	#19
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	how did you clean them? It requires special tools. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

09-15-2008, 01:03 AM	#18
maui_boi FC Rotary Power Join Date: Sep 2008 Location: MAUI, HAWAII iTrader: (0) Posts: 24 Rep Power: 0	well i only cleaned em for now im gonna test it when i have the time i only had time to clean the injectors but i will keep u guys posted cause this car is giving me problems lol

09-15-2008, 02:23 PM	#21
maui_boi FC Rotary Power Join Date: Sep 2008 Location: MAUI, HAWAII iTrader: (0) Posts: 24 Rep Power: 0	well then i semi cleaned it then i took them out and dipped em and checked for flow and now we just going c if they click which we neva try yet..wat else could be the problem though??

09-16-2008, 01:26 AM	#23
maui_boi FC Rotary Power Join Date: Sep 2008 Location: MAUI, HAWAII iTrader: (0) Posts: 24 Rep Power: 0	it doesn't spray when we jumped them with 12 volts well we couldn't see any sprays...

09-16-2008, 01:28 AM	#24
maui_boi FC Rotary Power Join Date: Sep 2008 Location: MAUI, HAWAII iTrader: (0) Posts: 24 Rep Power: 0	wat do u think could there be a problem with the plugs?

10-13-2008, 05:29 PM	#26
maui_boi FC Rotary Power Join Date: Sep 2008 Location: MAUI, HAWAII iTrader: (0) Posts: 24 Rep Power: 0	sorrie i havent been on for the longest time but my car starts and runs good now just gotta clean the injectors still yet though cause i can feel it pulling back a little at full throttle but other than that all i did was change the TPS with another cars one and it ran fine after that so im guessing it was a bad TPS