What spark plug wires do you use?

Eatmyclutch · 06-30-2008, 08:57 PM

Is there a recommended plug wire for the 1st generation such as NGK for spark plugs?

Posting link to online vendor would help as well.

P71 · 06-30-2008, 10:18 PM

www.magnecor.com

I run the KV85 Competition Series. It was worth 3 tenths on the drag strip over brand new Mazda wires with no other changes, on the same day.

Rogue_Wulff · 06-30-2008, 10:26 PM

I run the NGK wires that many places sell. They work plenty good, and aren't real pricey.

Kentetsu · 07-01-2008, 06:48 AM

I build my own, using a custom wire kit from Autozone (Accel?). They're nice and thick, and you choose the length of each wire for a custom fit. Works great if you have modified the ignition system, like relocating coils and such...

Eatmyclutch · 07-02-2008, 12:35 AM

Thanx for the responses.

orion84gsl · 07-02-2008, 11:19 PM

I use the Ultra 8mm wires that RB has. They are specific lengths, but a little pricey. Haven't had any problems with them yet.

06-30-2008, 08:57 PM	#1
Eatmyclutch business as usual Join Date: Apr 2008 Location: Emerald City Posts: 154 Rep Power: 0	What spark plug wires do you use? Is there a recommended plug wire for the 1st generation such as NGK for spark plugs? Posting link to online vendor would help as well. __________________ Bitch

06-30-2008, 10:18 PM	#2
P71 RCC Contributor Join Date: Feb 2008 Location: WA State Posts: 651 Rep Power: 18	www.magnecor.com I run the KV85 Competition Series. It was worth 3 tenths on the drag strip over brand new Mazda wires with no other changes, on the same day. __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

07-02-2008, 12:35 AM	#5
Eatmyclutch business as usual Join Date: Apr 2008 Location: Emerald City Posts: 154 Rep Power: 0	Thanx for the responses. __________________ Bitch

06-30-2008, 10:26 PM	#3
Rogue_Wulff Non Member Join Date: Jun 2008 Posts: 310 Rep Power: 18	I run the NGK wires that many places sell. They work plenty good, and aren't real pricey.

07-01-2008, 06:48 AM	#4
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan Posts: 530 Rep Power: 18	I build my own, using a custom wire kit from Autozone (Accel?). They're nice and thick, and you choose the length of each wire for a custom fit. Works great if you have modified the ignition system, like relocating coils and such...

07-02-2008, 11:19 PM	#6
orion84gsl Rotary Fanatic Join Date: Mar 2008 Posts: 167 Rep Power: 18	I use the Ultra 8mm wires that RB has. They are specific lengths, but a little pricey. Haven't had any problems with them yet.