Fd belgium fortune build

Rx_sam · 04-25-2012, 04:18 PM

thanks

i can almost drive it. just need to go on the dyno and then technical control and then put it 5 cm lower because she's to high now

Rx_sam · 04-26-2012, 02:31 PM

speedjunkie · 05-16-2012, 08:56 PM

Man you are doing some awesome work. Is that Alcantara? I would imagine it's real since you're putting so much into everything else. Why half-ass it, right? lol I want to do that to my rear plastics and dash too, and then do the gauge hood and center plastics in something similar to Spirit R.

This looks so good lol.

Rx_sam · 05-17-2012, 04:35 AM

thanks

yes it's alcantara pain in the ass to work with on some parts.
it was a good thing that i bought twice as much alcantara then i actually needed... because it failed a lott

Rx_sam · 05-25-2012, 04:11 PM

http://www.youtube.com/watch?v=A-9eAbCfIIw

GySgtFrank · 05-25-2012, 04:21 PM

VERY, VERY!, nice Sam. It looks like all the time and effort you put into this project has paid off. Now you can go enjoy it.

Rx_sam · 05-26-2012, 12:18 AM

Thanks

allmost allmost , still need to get on the Dyno first (reason why she is so high of the ground) and technical control (registration) then i can enjoy it

Rx_sam · 06-02-2012, 03:32 PM

Rx_sam · 07-02-2012, 06:27 AM

the car will not be rolling this year i guess
because i'm just back home after surgery on my lower back
this is the result :

speedjunkie · 07-02-2012, 09:03 AM

Wow. That sucks man! Did you just hurt it or has it been hurt for a while? Hopefully you'll be fixed though.

MaczPayne · 07-02-2012, 04:16 PM

Sorry to hear!!! What happened?!

Rx_sam · 07-02-2012, 04:20 PM

it's from an accident from when i was 16 (12 years ago) and they told me it was something that came with birth, natural cause. so the pain should have been something else. but tru the years i had a lott of pain and while working on the car i forced myself (1.5 years ago) while putting the tranny in and caused a prolapse in my lower back. i tried to strech it as long as possible so i could get the car on the road but i lost feeling in my legs twice so the surgery became an urgent thing to do.

MaczPayne · 07-02-2012, 10:56 PM

That's no good man!!! No car is worth paralysis! Wish you the best on your speedy recovery!

GySgtFrank · 07-02-2012, 11:11 PM

I know FDs break engines regularly, but this is the first time I've heard of them actually damaging the owner. Hope you heal up quick.

Rx_sam · 07-03-2012, 01:20 AM

I'm too fanatically and i always keep on going and didn't want any help from someone.
it was not such a good idea

04-25-2012, 04:18 PM	#121
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	thanks i can almost drive it. just need to go on the dyno and then technical control and then put it 5 cm lower because she's to high now __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

04-26-2012, 02:31 PM	#122
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	__________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

05-17-2012, 04:35 AM	#124
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	thanks yes it's alcantara pain in the ass to work with on some parts. it was a good thing that i bought twice as much alcantara then i actually needed... because it failed a lott __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

05-25-2012, 04:11 PM	#125
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	http://www.youtube.com/watch?v=A-9eAbCfIIw __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

05-25-2012, 04:21 PM	#126
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. iTrader: (0) Posts: 1,005 Rep Power: 15	VERY, VERY!, nice Sam. It looks like all the time and effort you put into this project has paid off. Now you can go enjoy it. __________________ 1979 SA22C (parts of one anyway) http://rotarycarclub.com/rotary_foru...ad.php?t=15585 1975 MG Midget (building) http://rotarycarclub.com/rotary_foru...ad.php?t=18681 1988 N/A SE model FC, dead stock and less than 85k on the clock. This one actually runs, so I don't fuck with it.

05-16-2012, 08:56 PM	#123
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Man you are doing some awesome work. Is that Alcantara? I would imagine it's real since you're putting so much into everything else. Why half-ass it, right? lol I want to do that to my rear plastics and dash too, and then do the gauge hood and center plastics in something similar to Spirit R. This looks so good lol.

05-26-2012, 12:18 AM	#127
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	Thanks allmost allmost , still need to get on the Dyno first (reason why she is so high of the ground) and technical control (registration) then i can enjoy it __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

06-02-2012, 03:32 PM	#128
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	__________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-02-2012, 06:27 AM	#129
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	the car will not be rolling this year i guess because i'm just back home after surgery on my lower back this is the result : __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-02-2012, 09:03 AM	#130
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Wow. That sucks man! Did you just hurt it or has it been hurt for a while? Hopefully you'll be fixed though.

07-02-2012, 04:16 PM	#131
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	Sorry to hear!!! What happened?! __________________ Johnson TA FC in the works!

07-02-2012, 04:20 PM	#132
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	it's from an accident from when i was 16 (12 years ago) and they told me it was something that came with birth, natural cause. so the pain should have been something else. but tru the years i had a lott of pain and while working on the car i forced myself (1.5 years ago) while putting the tranny in and caused a prolapse in my lower back. i tried to strech it as long as possible so i could get the car on the road but i lost feeling in my legs twice so the surgery became an urgent thing to do. __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be

07-02-2012, 10:56 PM	#133
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	That's no good man!!! No car is worth paralysis! Wish you the best on your speedy recovery! __________________ Johnson TA FC in the works!

07-02-2012, 11:11 PM	#134
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. iTrader: (0) Posts: 1,005 Rep Power: 15	I know FDs break engines regularly, but this is the first time I've heard of them actually damaging the owner. Hope you heal up quick. __________________ 1979 SA22C (parts of one anyway) http://rotarycarclub.com/rotary_foru...ad.php?t=15585 1975 MG Midget (building) http://rotarycarclub.com/rotary_foru...ad.php?t=18681 1988 N/A SE model FC, dead stock and less than 85k on the clock. This one actually runs, so I don't fuck with it.

07-03-2012, 01:20 AM	#135
Rx_sam Rotary Fanatic Join Date: Nov 2010 Location: Belgium iTrader: (0) Posts: 105 Rep Power: 15	I'm too fanatically and i always keep on going and didn't want any help from someone. it was not such a good idea __________________ I sleep on the right side of my bed, I drive on the right side of the road, I sit on the right side in my car Belgium Veilside Fortune Project --> www.rotormotor.be