Intake Manifold Bolt Size

one320fc · 02-28-2008, 05:13 PM

Need to replace bolts for intake manifold on a 12A with allan head cap screws. Any one know what size/pitch? Thanks

WE3RX7 · 02-28-2008, 06:09 PM

I wish I had that part number from when I did it...

I believe its an M12 but dont remember the pitch. Just take your factory one w/ you and swing by Lowe's... they have those fitment guides there to test it out.. thats how I found mine...

djmtsu · 02-28-2008, 06:39 PM

^^yep^^ Or go to a local Advance Auto or any auto parts store. They have thread sizers there as well. Then, if possible, go to a local hardware store. I have had better luck at the local place for Stainless and capheads than at the big box places.

Jeff20B · 03-02-2008, 02:40 PM

8mm x 1.25. These allen head bolts typically are 6mm. I had to get a set for a dellorto once upon a time.

02-28-2008, 05:13 PM	#1
one320fc one Apex @ a time Join Date: Feb 2008 Location: Culpeper VA Posts: 272 Rep Power: 18	Intake Manifold Bolt Size Need to replace bolts for intake manifold on a 12A with allan head cap screws. Any one know what size/pitch? Thanks

02-28-2008, 06:39 PM	#3
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	^^yep^^ Or go to a local Advance Auto or any auto parts store. They have thread sizers there as well. Then, if possible, go to a local hardware store. I have had better luck at the local place for Stainless and capheads than at the big box places. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-28-2008, 06:09 PM	#2
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I wish I had that part number from when I did it... I believe its an M12 but dont remember the pitch. Just take your factory one w/ you and swing by Lowe's... they have those fitment guides there to test it out.. thats how I found mine...

03-02-2008, 02:40 PM	#4
Jeff20B Rotary Fanatic Join Date: Mar 2008 Posts: 215 Rep Power: 18	8mm x 1.25. These allen head bolts typically are 6mm. I had to get a set for a dellorto once upon a time.