Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

knonfs · 11-15-2011, 08:05 AM

Quote:

Originally Posted by TitaniumTT

emmissions test before the 23rd so I can keep my reg

I hate cars...

Emissions on the FC? Mans you are are on a tight schedule!

Quote:

Originally Posted by TitaniumTT

On a different note though, I will be starting full time @ Speed1 on 12/5

Yeah yeah, you will be an asset to the shop, no doubt about it

***TitaniumTT*** · 11-15-2011, 10:07 AM

Quote:

Originally Posted by helghast7

holy shit! congrats! now i only have to drive one place for all my fab and info needs lol

Quote:

Originally Posted by WE3RX7

First off - YAY!! You will now be my fabrication bitch...

Seriously glad to hear that though man. It'll be nice to get you closer to VA and I know Dave could really put you to work! But don't think this makes you too good to respond to PMs

I ain't noones bitch..... bitch

That's what a few people have said, Yay, you're closer to me now! I guess the Hudson is some monstrous geographic boundry for some

Yeah well, sorry bout that..... when you start posting pics of this so called "progress," I'll start reponding to pm's

***TitaniumTT*** · 11-15-2011, 10:13 AM

Quote:

Originally Posted by Gravity Fed

what part of PA are you moving too?

The sop is in Lenhartsville, which is 15-20 miles west of Allentown, you can throw a stone and hit 78, literally. Im going to be withen a 20 minute drive of the shop

Quote:

Originally Posted by 2gslse

I'm going to use a Haltech platinum 1000 (not everyone needs high tech Motec) I don't have the harness built for it yet either its on my long list of crap to be done once the engine is in the car we will need to talk once things start coming together more. its gonna be a busy year coming up there a few major jobs and not enough time in the day to do them all and I will be slammed at work beginning in Jan my other half at work is retiring and no replacement in sight yet.

I know that feeling all to well. You should have us build the harness, you want us to build the harness, we will build the harness

Seriously though, remember my harness? All the raychem, milspec connectors, bulkhead release etc etc etc.... yeah... let's do it that way. Give a call man, let's start figuring shit out cuz it ALWAYS takes 2-3 times as long as ya think.

***TitaniumTT*** · 11-15-2011, 10:21 AM

Quote:

Originally Posted by knonfs

Emissions on the FC? Mans you are are on a tight schedule!

Yeah yeah, you will be an asset to the shop, no doubt about it

Actually, the emmissions is already a year late, but because the reg is up, they wont renew that until I take and pass an emmissions test.... fucking PITA ct....

Thanks man!

WE3RX7 · 11-15-2011, 12:07 PM

progress pics are up... Bitch lol..

Quote:

Originally Posted by TitaniumTT

I ain't noones bitch..... bitch

That's what a few people have said, Yay, you're closer to me now! I guess the Hudson is some monstrous geographic boundry for some

Yeah well, sorry bout that..... when you start posting pics of this so called "progress," I'll start reponding to pm's

***TitaniumTT*** · 11-15-2011, 01:10 PM

You stacked a keg? That's progress? I bet you voted for Obama

JhnRX7 · 11-15-2011, 03:50 PM

Quote:

Originally Posted by TitaniumTT

On a different note though, I will be starting full time @ Speed1 on 12/5

NICE!!

Now you will have to join us at all the NJMP track days since you will be closer. I will have to stop in for a corner balance and check out the shop in the early spring.

Also.... I dont know if Dan told you about "BlackCarTrackCar", but once we finally get our asses in gear to start on that the first thing will be a full cage. I think we know where we can get that done now

knonfs · 11-15-2011, 06:01 PM

Quote:

Originally Posted by TitaniumTT

Actually, the emmissions is already a year late, but because the reg is up, they wont renew that until I take and pass an emmissions test.... fucking PITA ct....

Thanks man!

I feel your pain, the first thing that I have to do when I get the car, is the damn e-test

WE3RX7 · 11-15-2011, 07:23 PM

Quote:

Originally Posted by TitaniumTT

You stacked a keg? That's progress? I bet you voted for Obama

I'd rather stack 'em then blow 'em

What will be your focus at Dave's place? Fabrication, engine building, bodywork, tuning, all the above?

helghast7 · 11-15-2011, 08:21 PM

does anyone know were to get borg warner airwerk turbos cheap? right now the price to beat is 800 bucks for an s360 lol

***TitaniumTT*** · 11-15-2011, 11:36 PM

Quote:

Originally Posted by knonfs

I feel your pain, the first thing that I have to do when I get the car, is the damn e-test

Damnit.... I think this will be my last one before im exempt but I have a feeling that because I'm a year late, they'll go by due date, not test date, meaning I'll need to take one more next year..... bastards...

Quote:

Originally Posted by JhnRX7

NICE!!

Now you will have to join us at all the NJMP track days since you will be closer. I will have to stop in for a corner balance and check out the shop in the early spring.

Also.... I dont know if Dan told you about "BlackCarTrackCar", but once we finally get our asses in gear to start on that the first thing will be a full cage. I think we know where we can get that done now

Yup yup, I plan on tracking a bunch more next year, and shit yeah bring her up for some cornerbalancing.... gotta do it for myself actually

Nope, Dan never told me about that, but shit yeah bring her up... all the equipment is there and there's a few full blown track cars there now

***TitaniumTT*** · 11-15-2011, 11:44 PM

Quote:

Originally Posted by WE3RX7

I'd rather stack 'em then blow 'em

What will be your focus at Dave's place? Fabrication, engine building, bodywork, tuning, all the above?

If you're not breaking shit, you're not trying hard enough

All of the above, plus electrical. Tuning will be the main focus to start though...... soooooooo when do you wanna get the 8 strapped down again?

helghast7 · 11-16-2011, 12:54 AM

Quote:

Originally Posted by TitaniumTT

If you're not breaking shit, you're not trying hard enough

guess i must be trying too hard lol

Whizbang · 11-16-2011, 05:41 AM

interestingly, i was looking at either allentown, pittsburg or erie for when i get out of the military. I want to be near a city, but live far enough out to have some privacy.

***TitaniumTT*** · 11-16-2011, 08:35 AM

No shit? I don't know pittsburg or erie well enough, but go 15 minutes outside of Allentown and its prett hardcore farmland... so yeah

11-15-2011, 01:10 PM	#1341
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	You stacked a keg? That's progress? I bet you voted for Obama __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-15-2011, 08:21 PM	#1345
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ iTrader: (0) Posts: 223 Rep Power: 15	does anyone know were to get borg warner airwerk turbos cheap? right now the price to beat is 800 bucks for an s360 lol __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

11-16-2011, 05:41 AM	#1349
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	interestingly, i was looking at either allentown, pittsburg or erie for when i get out of the military. I want to be near a city, but live far enough out to have some privacy. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-16-2011, 08:35 AM	#1350
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	No shit? I don't know pittsburg or erie well enough, but go 15 minutes outside of Allentown and its prett hardcore farmland... so yeah __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**