|
Introduce yourself!! Tell me something about you and your history with rotary.. |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
10-21-2011, 02:30 PM | #1 |
2006 Silver RX-8
|
Greetings from Canada
Hi all - following the prompts after registering for the forum and introducing myself to the group. After lusting for the RX-7 through my early (and broke) years, I went for a rotary last year and purchased a used 2006 Silver RX-8. I've only ever driven 'practical' vehicles previously, so this has been a treat!
|
10-22-2011, 12:05 AM | #3 |
I've been Wankeled!
|
Welcome to RCC. There are a few of us Canucks on here. Have fun with your Rx-8.
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
10-26-2011, 03:10 AM | #5 |
Rotary Fanatic
|
If you ever happen to drive 3000KM from where you are, to where I am,
I would be happy to go on a cruise with you!
__________________
Live the DriFD3S or die trying. JDM True Story. the Vacuum line, to my MAP became detached while I was legally drifting. my engine would not rev past 2500, and idled from 300-650 and was stalling. Fortunately, I acquired a Zip-Tie. I fixed a catastrophic engine failure, With a Zip-Tie. JDM FTW. |