Aftermarket FPR

Aees · 07-07-2011, 10:55 AM

Is it possible to install an aftermarket fuel pressure regulator with the stock rails? If not, where can I buy new fuel rails for my S5 TII Vert?

NoDOHC · 07-11-2011, 06:25 PM

This completely depends on what rails you are running. If you have the S4 type with the threaded fitting in the end, replace the FPR with a banjo bolt and install an aftermarket one downstream of that. I think that all turbos had a threaded secondary fuel rail.

Aees · 08-29-2011, 12:50 PM

Okay, mine doesnt have a threaded fitting in the end, so guess I need a S4 rail then. Are they the same except from the threaded fitting?

EJayCe996 · 08-29-2011, 01:40 PM

I had my friend cut my S5 rails and weld on steel -6 AN weld adapters.

My5ABaby · 08-29-2011, 09:11 PM

Quote:

Originally Posted by Aees

Okay, mine doesnt have a threaded fitting in the end, so guess I need a S4 rail then. Are they the same except from the threaded fitting?

They're not the same, but you can use an S4 on an S5. You just need to get some washers to space it appropriately and probably some longer bolts to hold it on.

07-07-2011, 10:55 AM	#1
Aees The Newbie Join Date: Aug 2010 Posts: 29 Rep Power: 0	Aftermarket FPR Is it possible to install an aftermarket fuel pressure regulator with the stock rails? If not, where can I buy new fuel rails for my S5 TII Vert?

07-11-2011, 06:25 PM	#2
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 18	This completely depends on what rails you are running. If you have the S4 type with the threaded fitting in the end, replace the FPR with a banjo bolt and install an aftermarket one downstream of that. I think that all turbos had a threaded secondary fuel rail. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

08-29-2011, 01:40 PM	#4
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX Posts: 283 Rep Power: 18	I had my friend cut my S5 rails and weld on steel -6 AN weld adapters. __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology.

08-29-2011, 12:50 PM	#3
Aees The Newbie Join Date: Aug 2010 Posts: 29 Rep Power: 0	Okay, mine doesnt have a threaded fitting in the end, so guess I need a S4 rail then. Are they the same except from the threaded fitting?