Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

***TitaniumTT*** · 04-23-2011, 02:47 PM

Sooooo you were driving a turbo'ed car with an n/a ecu?

Oh, there will be pics.... gotta show them off somehow.... hey, check out my brakes!!! The car doesn't move under it's own power, they aren't bleed or even hooked up... but damn they look gooooooooooooooooooooooooooooooooooooooooooooooooo d!!!!

vex · 04-23-2011, 03:13 PM

Yeah... pretty much.

Turbo II Rotor · 04-23-2011, 04:25 PM

Quote:

Originally Posted by TitaniumTT

Scott, what are your travel times and routes and whatnot?

Wake up at 6am on Friday and start riding this down while praying it doesn't rain.

I'm taking Thursday off as well but I have court in Hoboken so I wouldn't be able to get on the road till at least 10 which is a little later than I'd like so I'll just go Friday. I'm not sure on the route, I'll be following the GPS that'll be suction cupped to my gas tank.

helghast7 · 04-23-2011, 10:58 PM

^purdy

vex · 04-23-2011, 11:45 PM

Quote:

Originally Posted by helghast7

^purdy

Slow

***TitaniumTT*** · 04-24-2011, 09:23 PM

psssshhhhh, my ass!

Soooooooooooo I didn't get as much done as I wanted to this weekend and it seems that I have a problem with my TCMux..... it's getting 8V, but not sending the req'ed 5V to the hall effect sensors. This concerns me..... sooooo gotta get on the phone with MoTeC tomorrow and try to figure that out, then I'm still waiting on some other parts to show up, I did prep the bumper so I can paint that tomorrow night. Worse comes to worst, I can try overnighting parts from J-pan.......

I've also got a rotor sticker on the 5gal Jerry can on the back of The Mighty XJ, so I'll at least be swiming in Rotary spirit :rolf:

hades · 04-24-2011, 09:39 PM

Quote:

Originally Posted by TitaniumTT

psssshhhhh, my ass!

Soooooooooooo I didn't get as much done as I wanted to this weekend and it seems that I have a problem with my TCMux..... it's getting 8V, but not sending the req'ed 5V to the hall effect sensors. This concerns me..... sooooo gotta get on the phone with MoTeC tomorrow and try to figure that out, then I'm still waiting on some other parts to show up, I did prep the bumper so I can paint that tomorrow night. Worse comes to worst, I can try overnighting parts from J-pan.......

I've also got a rotor sticker on the 5gal Jerry can on the back of The Mighty XJ, so I'll at least be swiming in Rotary spirit :rolf:

good luck! Its nice to know exhaust sleeves won't you away this time!

I should be drunk by the time you roll in.

***TitaniumTT*** · 04-24-2011, 11:07 PM

Not this time, this time it's brakes...... and it's not the brake kit. THat's here, and on, both of them, I dug up a brand new stock master in case I can't use the other one I've got because the lines that I ordered haven't gotten here yet..... If it's not one thing it's another. it's pissing me off so much that I almost... ALMOST spent $600 on a hydaulic flaring tool so I can make my own SS hardlines for -3 as opposed to ordering all this crap and waiting, and waiting, and waiting and WAITING!!!!

I'll be in ~ 20:00 - 21:00 on Thursday.... damn man, when are you getting in?

***TitaniumTT*** · 04-24-2011, 11:14 PM

Meh, I might as well show them off a little bit, seeing as how it's really the only way for people to see them......

Rears.....

Stock rear rotor on top of new rotor.

You can see where the stock caliper sits in relation to the wheel

And here's the kit installed.... I'll get more pics up later... sleepy time... worky tomorrow..... ugh..

I couldn't fit a **** hair between the caliper and the wheel.... it just don't get any bigger than this!

***TitaniumTT*** · 04-24-2011, 11:20 PM

Fronts....

Again, stock front rotor on top of new rotor.... I said DAYUM

Nope wait.... GAWD DAYAUM!!!!

Yes, that's right, 6-piston cali's..... what.... you;ve never heard of go big or go home? Or that my nickname is Dr. Overkill....

Stock cali mounted.....

And the new setup..... yet again... you just can't get any bigger than that...... I've actually got to run a small spacer with my Work Wheels to clear the caliper. I should've gone with the Narrow Superlights.... but we thought we had the room. Oh well, the front coul've used a little spacing, just a touch, now I have a reason... or I could just go back to the rears.

Now... lets hope all my parts show up tomorrow like they;re supposed too...

Mazdabater · 04-25-2011, 01:32 AM

I love the brakes. But I can't believe you were running drilled rotors? Were you planning on them cracking so u could justify the new brakes lol?

hades · 04-25-2011, 06:01 AM

Quote:

Originally Posted by TitaniumTT

Not this time, this time it's brakes...... and it's not the brake kit. THat's here, and on, both of them, I dug up a brand new stock master in case I can't use the other one I've got because the lines that I ordered haven't gotten here yet..... If it's not one thing it's another. it's pissing me off so much that I almost... ALMOST spent $600 on a hydaulic flaring tool so I can make my own SS hardlines for -3 as opposed to ordering all this crap and waiting, and waiting, and waiting and WAITING!!!!

I'll be in ~ 20:00 - 21:00 on Thursday.... damn man, when are you getting in?

Flight lands at 1:30. I should be out there by 4-5 at the very latest.

Force13b · 04-25-2011, 11:17 AM

Question is will the FC make it to DGRR?

***TitaniumTT*** · 04-25-2011, 12:37 PM

Answer is, probably not

EJayCe996 · 04-25-2011, 12:42 PM

Quote:

Originally Posted by TitaniumTT

Answer is, probably not

Fanboi response is: NO FUCKING EXCUSES

04-23-2011, 02:47 PM	#1006
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Sooooo you were driving a turbo'ed car with an n/a ecu? Oh, there will be pics.... gotta show them off somehow.... hey, check out my brakes!!! The car doesn't move under it's own power, they aren't bleed or even hooked up... but damn they look gooooooooooooooooooooooooooooooooooooooooooooooooo d!!!! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-23-2011, 03:13 PM	#1007
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	Yeah... pretty much. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

04-23-2011, 10:58 PM	#1009
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ iTrader: (0) Posts: 223 Rep Power: 15	^purdy __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

04-24-2011, 09:23 PM	#1011
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	psssshhhhh, my ass! Soooooooooooo I didn't get as much done as I wanted to this weekend and it seems that I have a problem with my TCMux..... it's getting 8V, but not sending the req'ed 5V to the hall effect sensors. This concerns me..... sooooo gotta get on the phone with MoTeC tomorrow and try to figure that out, then I'm still waiting on some other parts to show up, I did prep the bumper so I can paint that tomorrow night. Worse comes to worst, I can try overnighting parts from J-pan....... I've also got a rotor sticker on the 5gal Jerry can on the back of The Mighty XJ, so I'll at least be swiming in Rotary spirit :rolf: __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-24-2011, 11:07 PM	#1013
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Not this time, this time it's brakes...... and it's not the brake kit. THat's here, and on, both of them, I dug up a brand new stock master in case I can't use the other one I've got because the lines that I ordered haven't gotten here yet..... If it's not one thing it's another. it's pissing me off so much that I almost... ALMOST spent $600 on a hydaulic flaring tool so I can make my own SS hardlines for -3 as opposed to ordering all this crap and waiting, and waiting, and waiting and WAITING!!!! I'll be in ~ 20:00 - 21:00 on Thursday.... damn man, when are you getting in? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-25-2011, 01:32 AM	#1016
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS iTrader: (0) Posts: 326 Rep Power: 15	I love the brakes. But I can't believe you were running drilled rotors? Were you planning on them cracking so u could justify the new brakes lol?

04-25-2011, 11:17 AM	#1018
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 iTrader: (1) Posts: 315 Rep Power: 16	Question is will the FC make it to DGRR?

04-25-2011, 12:37 PM	#1019
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Answer is, probably not __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**