Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

2gslse · 04-15-2011, 08:12 PM

Quote:

Originally Posted by TitaniumTT

Wanna swing a little east after your dyno playdate today? Plenty of work

Good luck on the dyno today MC!

Thanks man, maybe next trip up. Like I was telling you on the phone 396 RWHP at 14 psi on an Apexi RX6 single is a great # especially with 35K on the clock. I will be looking into my wastegate soon though Dave said it may have a weak spring in the wastegate or its binding after it gets hot. this set-up will be killer in my FB with the 13B-RE.

***TitaniumTT*** · 04-15-2011, 10:50 PM

Quote:

Originally Posted by vex

Too expensive and not sold in the amount I need. (I am not going to pay $425 for 50 feet)

Ummmmm are you buying a spool of 1.5"?

Prowireusa.com man, cheapest prices I've found and they sell it by the foot

Quote:

Originally Posted by tweiss3

I was thinking about it today, the title of this subforum bothers me. Is there ever such a thing as a rotary car build? I'm not sure I belive that. For rotaries, its always only rebuild, or extensive maitnence with new and upgraded parts.

I shall submit this thread as Exhibit 1.

You build it once, and then you find things to improve upon and then you fix those things. Sometimes you find your engine bay and engine so dirty that it requires you to pull said engine to clean everything. Sometimes you're just an overbearing OCD asshole, I submit myself as exibit 1

***TitaniumTT*** · 04-15-2011, 10:51 PM

Quote:

Originally Posted by FC3S Murray

........pics...................are................ ..good.............

Pics are coming, don't you worry. By Sunday Morning I expect a pool going

Quote:

Originally Posted by 2gslse

Thanks man, maybe next trip up. Like I was telling you on the phone 396 RWHP at 14 psi on an Apexi RX6 single is a great # especially with 35K on the clock. I will be looking into my wastegate soon though Dave said it may have a weak spring in the wastegate or its binding after it gets hot. this set-up will be killer in my FB with the 13B-RE.

No worries man, those are some damn good numbers indeed. Are you taking that setup and dropping it in the FB? That would be soooooooooooo money. What wastegate are you running?

***TitaniumTT*** · 04-15-2011, 10:55 PM

Soooooooooooooooo here's something interesting that happened today. First the good news...... my turbo's came in and they are AWESOME! I got to molest them for about 5 minutes until my buddy showed up in his POS daily bitch.... an '88 300SE Benz. This piece of poo has an oilpan that is not only cast AL, but it also hangs lower than the front bumper, and farther forward than the wheels

Sooooo today as he was pulling into a parking spot he went a little too far, cracked the curb, and now there is a 6"x1" HOLE in the oilpan. So we spent a little time tonight loosening the motor mounts, removing the engine shock absorbers

hoising the fucker up and getting the pan out. Tomorrow he is going to square up the hole, cut a few pieces of AL out and I'm going to weld the motherf*cker up..... soooooooooooooo yeah, that's taking a little time away from the ole' FC. Pics coming of that soon too.

vex · 04-16-2011, 08:21 AM

Quote:

Originally Posted by TitaniumTT

Ummmmm are you buying a spool of 1.5"?

Prowireusa.com man, cheapest prices I've found and they sell it by the foot

Thanks! That's much better to deal with. I was looking at digikey and they only sold it by the spool. I'll be ordering it from them shortly.

***TitaniumTT*** · 04-16-2011, 09:49 AM

Prowireusa has the datasheets on the Raychem and the Raychem boots so you can shoose what you need. Take a look at the Raychem boots.... they are the definition of sexy heatshrink..... :drool: I spent probably $1200 on Raychem and boots for the Landi.

2gslse · 04-16-2011, 11:19 AM

No worries man, those are some damn good numbers indeed. Are you taking that setup and dropping it in the FB? That would be soooooooooooo money. What wastegate are you running?[/QUOTE]

Yes it is the set-up for the FB the only changes are I will be using a 13B-RE and the later version RX6 turbo that uses a short runner manifold (I will have to clearance the lower manifold a little bit since the compressor just touches the RE lower) I already have the engine, the S4 N/A rotors I got from you, turbo kit from another FD, huge front mount intercooler and the Haltech platinum 1000 sitting here so most of my build is waiting for a little more money and a lot of time. hoping to crack 400 hp in a 2500lb car so it should be a rocket until the diff explodes

The wastegate is the one that came with the kit its an Apexi also but they have had a few failures on them in the past the bushing binds on the shaft when they get hot so all I need to do is bore out the bushing a tiny bit Dave said he has seen it before with that gate so I'll do both of mine at the same time

WE3RX7 · 04-16-2011, 01:32 PM

At least somebody is making progress this weekend!

***TitaniumTT*** · 04-16-2011, 01:51 PM

See the written not

***TitaniumTT*** · 04-16-2011, 01:53 PM

Quote:

Originally Posted by 2gslse

Yes it is the set-up for the FB the only changes are I will be using a 13B-RE and the later version RX6 turbo that uses a short runner manifold (I will have to clearance the lower manifold a little bit since the compressor just touches the RE lower) I already have the engine, the S4 N/A rotors I got from you, turbo kit from another FD, huge front mount intercooler and the Haltech platinum 1000 sitting here so most of my build is waiting for a little more money and a lot of time. hoping to crack 400 hp in a 2500lb car so it should be a rocket until the diff explodes

The wastegate is the one that came with the kit its an Apexi also but they have had a few failures on them in the past the bushing binds on the shaft when they get hot so all I need to do is bore out the bushing a tiny bit Dave said he has seen it before with that gate so I'll do both of mine at the same time

Damn dude... I think I'm gonna have to hit you up for a ride @ DGRRXI seeing as how I'll be in a MAYBE 150rwhp lifted XJ.

That FB will be a rocket. Ever give any thoughts to swapping out the rear for an IRS?

Quote:

Originally Posted by WE3RX7

At least somebody is making progress this weekend!

I'm making progress... I just finished cleaning my shop.... now it's onto cleaning the engine bay

2gslse · 04-16-2011, 03:00 PM

No problem Brian just hit me up when you guys get there we will be in #52 this year.
I see you are stopping at DD in stevens city at 1100 should I notify the authorities of your arrival? we will be leaving early in the morning otherwise we would caravan down with you.

hades · 04-16-2011, 10:45 PM

Me too me too!

mazpower · 04-18-2011, 12:51 PM

Quote:

Originally Posted by TitaniumTT

See the written not

Holy crap man.

You been getting any sleep?

***TitaniumTT*** · 04-18-2011, 06:33 PM

Nope.

Sleep is for the weak and the lazy

I'll sleep when I'm dead

I slept for the first 9 months of my life, I'm trying to make up for lost time

The standing record for me to beat is 52 hrs.... You sure you want me back in Cali for that 3-rotor

hades · 04-18-2011, 07:31 PM

Quote:

Originally Posted by TitaniumTT

Nope.

Sleep is for the weak and the lazy

I'll sleep when I'm dead

I slept for the first 9 months of my life, I'm trying to make up for lost time

The standing record for me to beat is 52 hrs.... You sure you want me back in Cali for that 3-rotor

still trying to make it in the FC?

04-15-2011, 10:55 PM	#934
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Soooooooooooooooo here's something interesting that happened today. First the good news...... my turbo's came in and they are AWESOME! I got to molest them for about 5 minutes until my buddy showed up in his POS daily bitch.... an '88 300SE Benz. This piece of poo has an oilpan that is not only cast AL, but it also hangs lower than the front bumper, and farther forward than the wheels Sooooo today as he was pulling into a parking spot he went a little too far, cracked the curb, and now there is a 6"x1" HOLE in the oilpan. So we spent a little time tonight loosening the motor mounts, removing the engine shock absorbers hoising the fucker up and getting the pan out. Tomorrow he is going to square up the hole, cut a few pieces of AL out and I'm going to weld the motherfcker up..... soooooooooooooo yeah, that's taking a little time away from the ole' FC. Pics coming of that soon too. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck* with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-16-2011, 09:49 AM	#936
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Prowireusa has the datasheets on the Raychem and the Raychem boots so you can shoose what you need. Take a look at the Raychem boots.... they are the definition of sexy heatshrink..... :drool: I spent probably $1200 on Raychem and boots for the Landi. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-16-2011, 11:19 AM	#937
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	No worries man, those are some damn good numbers indeed. Are you taking that setup and dropping it in the FB? That would be soooooooooooo money. What wastegate are you running?[/QUOTE] Yes it is the set-up for the FB the only changes are I will be using a 13B-RE and the later version RX6 turbo that uses a short runner manifold (I will have to clearance the lower manifold a little bit since the compressor just touches the RE lower) I already have the engine, the S4 N/A rotors I got from you, turbo kit from another FD, huge front mount intercooler and the Haltech platinum 1000 sitting here so most of my build is waiting for a little more money and a lot of time. hoping to crack 400 hp in a 2500lb car so it should be a rocket until the diff explodes The wastegate is the one that came with the kit its an Apexi also but they have had a few failures on them in the past the bushing binds on the shaft when they get hot so all I need to do is bore out the bushing a tiny bit Dave said he has seen it before with that gate so I'll do both of mine at the same time __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

04-16-2011, 03:00 PM	#941
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	No problem Brian just hit me up when you guys get there we will be in #52 this year. I see you are stopping at DD in stevens city at 1100 should I notify the authorities of your arrival? we will be leaving early in the morning otherwise we would caravan down with you. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

04-16-2011, 10:45 PM	#942
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land iTrader: (0) Posts: 316 Rep Power: 17	Me too me too! __________________ This is going to tear

04-16-2011, 01:32 PM	#938
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	At least somebody is making progress this weekend!

04-18-2011, 06:33 PM	#944
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Nope. Sleep is for the weak and the lazy I'll sleep when I'm dead I slept for the first 9 months of my life, I'm trying to make up for lost time The standing record for me to beat is 52 hrs.... You sure you want me back in Cali for that 3-rotor __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**