making a nikki turbo intake

rx71king · 03-23-2011, 12:52 AM

well i got a few nikki carb handed down to me. .two 79 to 80 and three off fb's...not so bad looking carb when you pull all the crap off of them...i am in the middle of boost prepping one of them.the stock intake is no good if you just want to use the stock s5 turbo manifold.so i decided to make a intake for it.and + i have never seen one before
nikki turbo 07.jpg

07.jpg

nikki turbo 003.jpg

rx71king · 03-23-2011, 11:25 AM

three more pics.
nikki turbo 001.jpg

nikki turbo 002.jpg

nikki turbo 006.jpg

GoopyPerformance · 03-28-2011, 08:26 PM

Nice work..I love the Holley/turbo combos!!!
Make sure you post photos and instructions on prepping the carb plates, metering blocks both on marine carbs and regular carbs & and all other blow through related accessorizes.

Holley prepped turbos are very inexpensive HP parts!!

We have a customer that has run 8.60s on a Holley carb turbo!!!!

rx71king · 03-28-2011, 09:40 PM

thanks jon....will do.. you have see my car befor.this is my new holley new 003.jpg,it a 390 cfm with weber power plates..

GySgtFrank · 04-16-2011, 09:43 PM

The Nikki might be a bit small on a turbo combination as it only flows about 315 cfm in stock condition. I have been kicking around the possibility of using two Nikki's for a 630 cfm intake. Since you're making the intake anyway it might be fun. I've never heard of anyone doing this before, but I'm sure someone must have tried it. If nothing else a dual four barrel intake on a rotary would be a good conversation piece.

730RWHP12A · 04-17-2011, 09:09 AM

Quote:

Originally Posted by GySgtFrank

The Nikki might be a bit small on a turbo combination as it only flows about 315 cfm in stock condition. I have been kicking around the possibility of using two Nikki's for a 630 cfm intake. Since you're making the intake anyway it might be fun. I've never heard of anyone doing this before, but I'm sure someone must have tried it. If nothing else a dual four barrel intake on a rotary would be a good conversation piece.

when your doing a blow through turbo setup the carb does not need to be big, it simply needs to flow enough fuel. @ 10 psi it flows way more than 600 cfm, thats for sure!!
i made 540 rwhp with a nikki carb turbo. the challenge was always getting enough fuel, not air

rx71king · 08-20-2011, 11:33 PM

i scrap that idea and made a holley intake instead...12a intake manifold 026.jpg

Rich@SR · 02-09-2012, 02:32 PM

Quote:

Originally Posted by rx71king

i scrap that idea and made a holley intake instead...Attachment 10932

Nice! Keep us updated.

03-23-2011, 12:52 AM	#1
rx71king Rotary Fanatic Join Date: Jul 2009 Location: queens ny iTrader: (0) Posts: 117 Rep Power: 16	making a nikki turbo intake well i got a few nikki carb handed down to me. .two 79 to 80 and three off fb's...not so bad looking carb when you pull all the crap off of them...i am in the middle of boost prepping one of them.the stock intake is no good if you just want to use the stock s5 turbo manifold.so i decided to make a intake for it.and + i have never seen one before nikki turbo 07.jpg 07.jpg nikki turbo 003.jpg Last edited by rx71king; 02-14-2012 at 12:03 AM..

03-28-2011, 09:40 PM	#4
rx71king Rotary Fanatic Join Date: Jul 2009 Location: queens ny iTrader: (0) Posts: 117 Rep Power: 16	thanks jon....will do.. you have see my car befor.this is my new holley new 003.jpg,it a 390 cfm with weber power plates.. Last edited by rx71king; 02-14-2012 at 12:02 AM..

04-16-2011, 09:43 PM	#5
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. iTrader: (0) Posts: 1,005 Rep Power: 15	The Nikki might be a bit small on a turbo combination as it only flows about 315 cfm in stock condition. I have been kicking around the possibility of using two Nikki's for a 630 cfm intake. Since you're making the intake anyway it might be fun. I've never heard of anyone doing this before, but I'm sure someone must have tried it. If nothing else a dual four barrel intake on a rotary would be a good conversation piece. __________________ 1979 SA22C (parts of one anyway) http://rotarycarclub.com/rotary_foru...ad.php?t=15585 1975 MG Midget (building) http://rotarycarclub.com/rotary_foru...ad.php?t=18681 1988 N/A SE model FC, dead stock and less than 85k on the clock. This one actually runs, so I don't fuck with it.

08-20-2011, 11:33 PM	#7
rx71king Rotary Fanatic Join Date: Jul 2009 Location: queens ny iTrader: (0) Posts: 117 Rep Power: 16	i scrap that idea and made a holley intake instead...12a intake manifold 026.jpg Last edited by rx71king; 08-30-2011 at 10:21 PM..

03-23-2011, 11:25 AM	#2
rx71king Rotary Fanatic Join Date: Jul 2009 Location: queens ny iTrader: (0) Posts: 117 Rep Power: 16	three more pics. nikki turbo 001.jpg nikki turbo 002.jpg nikki turbo 006.jpg

03-28-2011, 08:26 PM	#3
GoopyPerformance Rotary parts manufacture Join Date: Sep 2010 Location: Stony point NY iTrader: (1) Posts: 170 Rep Power: 15	Nice work..I love the Holley/turbo combos!!! Make sure you post photos and instructions on prepping the carb plates, metering blocks both on marine carbs and regular carbs & and all other blow through related accessorizes. Holley prepped turbos are very inexpensive HP parts!! We have a customer that has run 8.60s on a Holley carb turbo!!!!