FC3S Murray's never ending build.

***TitaniumTT*** · 06-17-2010, 10:34 AM

Ahem -

I'll give a call tomorrow buddy

Prodigy · 06-17-2010, 11:15 AM

So I know my opinion will mean a tiny bit less then a blind/deaf person... But the car looks spectacular.... Running or not I just want to stare at it....

I found a qoute from earlier in this thread, I think it sums up pretty much what I think you should do....

Quote:

Originally Posted by FC3S Murray

Thanks. I won't give up, I have too much shit specifically for this car. Would be a huge loss to my wallet too.

It's a pain in the ass to own these cars... They are like aircraft engines... 3 hours of work for 1/2hour of operation... But as stated before, when they are running, it makes it all worth it...

For some reason it is so much better then any piston car... Might be the fact there is no pistons... But either way...

I think it's worth the effort.... That is my opinion though....

Either way... The build so far looks so awesome... One of the cleanest S4's I've seen, in and out, and the engine bay too... Props for all the work you have put in....

J.

project86 · 06-17-2010, 11:33 AM

i think his LS is already on the way to his house......... lol

project86 · 06-17-2010, 11:33 AM

BTW sean let me know when you want me to paint that front bumper!! im down and it will look spectacular

Rotary Inspired · 06-17-2010, 11:55 AM

unfortunately I dont think he is staying 13b as I bought a few parts of him and should be delivered today according to usps.

Prodigy · 06-17-2010, 12:40 PM

Quote:

Originally Posted by project86

i think his LS is already on the way to his house......... lol

That's what I get for posting on my phone, and not reading every page :P

Either way, car still looks great...

And as long as he gets to enjoy it a bit more :P

J.

FC3S Murray · 06-21-2010, 06:25 PM

Thanks guys for the kind words BUT yes I already have an LS1 on the way. Almost all my rotary shit is sold...it wet quick BUT itwill cover most of the basic hardware for this swap.

Brian......That is a funny post you S.O.B lol...I still had patience then

Kyle- I will let you know when I want you to paint, thanks buddy!!

Prodigy- Thank you for the compliments...it is pretty..that is why I couldn't bring my self to sell it.

project86 · 06-21-2010, 09:34 PM

Quote:

Originally Posted by FC3S Murray

Kyle- I will let you know when I want you to paint, thanks buddy!!

That sounds super. Im buying my compressor next time i get paid and then the gun will be the next order of business... SATAjet 3000 here i come!!!

FC3S Murray · 07-10-2010, 11:32 PM

muhahahahahahahahaha

Nismo · 07-10-2010, 11:43 PM

Quote:

Originally Posted by FC3S Murray

muhahahahahahahahaha

A lot of aluminum there, I bet you could get 150 or more for scrap! So what are the plans for the new engine?

need RX7 · 07-11-2010, 01:23 AM

Oh snap!

FC3S Murray · 07-12-2010, 11:13 AM

Quote:

Originally Posted by Nismo

A lot of aluminum there, I bet you could get 150 or more for scrap! So what are the plans for the new engine?

Yeah it is still heavy even being all aluminum lol. My plans are: a 228R (228/229 .588/.588 114LSA) TSP cam, PRC dual valve springs, hardened 7.40 push rods, PCM re-flash by FROST, Custom over the radiator intake, 1 7/8 jtr headers to 2.5'' piping-to X pipe- to racing beat cans.

Should yeild close to 380-400 rwhp AND ft/lbs trq

Slowly but surely coming together

Nismo · 07-12-2010, 12:24 PM

Quote:

Originally Posted by FC3S Murray

Yeah it is still heavy even being all aluminum lol. My plans are: a 228R (228/229 .588/.588 114LSA) TSP cam, PRC dual valve springs, hardened 7.40 push rods, PCM re-flash by FROST, Custom over the radiator intake, 1 7/8 jtr headers to 2.5'' piping-to X pipe- to racing beat cans.

Should yeild close to 380-400 rwhp AND ft/lbs trq

Slowly but surely coming together

So basically you are building a Single turbo 13BRE with a GM logo on it?

FC3S Murray · 07-12-2010, 05:14 PM

Quote:

Originally Posted by Nismo

So basically you are building a Single turbo 13BRE with a GM logo on it?

lol yep except for a little more torque on my end

***TitaniumTT*** · 07-12-2010, 05:19 PM

booooooooooooooo
hiissssssssssssssssssssss
boooooooooooooooooooooooo
hiiissssssssssssssssssssssssssssssss

Lame............

not to mention it's an N/A, so it will ALWAYS SUCK!!!!!!

Good to see your never ending build is still never ending Sean, too bad it no longer goes hmmmmmmmmmmmmmmmmmmmm

06-17-2010, 11:55 AM	#515
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC iTrader: (0) Posts: 75 Rep Power: 17	unfortunately I dont think he is staying 13b as I bought a few parts of him and should be delivered today according to usps. __________________ If you wanna become ASE certified buy the RX7.

06-21-2010, 06:25 PM	#517
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana iTrader: (3) Posts: 611 Rep Power: 16	Thanks guys for the kind words BUT yes I already have an LS1 on the way. Almost all my rotary shit is sold...it wet quick BUT itwill cover most of the basic hardware for this swap. Brian......That is a funny post you S.O.B lol...I still had patience then Kyle- I will let you know when I want you to paint, thanks buddy!! Prodigy- Thank you for the compliments...it is pretty..that is why I couldn't bring my self to sell it. __________________ Same pig, new soul

07-10-2010, 11:32 PM	#519
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana iTrader: (3) Posts: 611 Rep Power: 16	muhahahahahahahahaha __________________ Same pig, new soul

07-11-2010, 01:23 AM	#521
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	Oh snap! __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

07-12-2010, 05:19 PM	#525
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	booooooooooooooo hiissssssssssssssssssssss boooooooooooooooooooooooo hiiissssssssssssssssssssssssssssssss Lame............ not to mention it's an N/A, so it will ALWAYS SUCK!!!!!! Good to see your never ending build is still never ending Sean, too bad it no longer goes hmmmmmmmmmmmmmmmmmmmm __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-17-2010, 11:33 AM	#513
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	i think his LS is already on the way to his house......... lol

06-17-2010, 11:33 AM	#514
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	BTW sean let me know when you want me to paint that front bumper!! im down and it will look spectacular