Stumbled over from "the evil forum"

Sharingan 19 · 06-05-2010, 02:26 PM

Certainly not new to rotaries or forums, but I had no idea this one was out there. I see references to "the evil forum" in a large number of threads here....wtf is that about? I'm sure there's a thread somewhere w/ details, but that seems more like lounge material and that's a place I avoid on every forum I frequent so.....

Anyways, car is an 87 TII work in progress. A pic from when I was making progress ...

After a dumb bitch in a Ford Explorer ran me off the interstate ....

On the way back up....

Phoenix7 · 06-05-2010, 02:46 PM

welcome and nice car, can't wait to see it finished...again. Where are you from? is that a real GTR or an aftermarket decal on an FC?

Also note that SOME ppl don't like the term evil forum (even though it's been that since the early 2000s) because of the beef with RCC...they think it's us instigating shit when in reality it was the name given to the 7club by teamfc3s.org.

Welcome and don't fear the lounge...we're not the 7club or any other club for that matter.

mnrthrt · 06-05-2010, 03:09 PM

sux what she did amigo! good lookin car though

***ZGN*** · 06-05-2010, 03:16 PM

Long story short, several years ago 7club was purchased by a large corperation that jacked up vendor rates in the hundreds per month to adversitse on their forum. Lots of long time small vendors could not pay the high rates and were not allowed to sell on their forum. RCC was started to allow all members and vendors to sell rotary parts online with ZERO fee's.

Why support a rotary forum who does not support your rotary vendors. We can provide everything that you need here and also when you click refresh the site does not take 20 seconds+ to load.

Welcome to the all #1 all rotary forum. Visit often!

hecmanortiz · 06-05-2010, 05:17 PM

I've always wondered but never asked. Good explanation.
Thanks Kevin.

RAZOR · 06-06-2010, 11:20 AM

good info. I did no know that story. Nice car too

RICE RACING · 06-07-2010, 08:10 PM

Quote:

Originally Posted by ZGN

Long story short, several years ago 7club was purchased by a large corperation that jacked up vendor rates in the hundreds per month to adversitse on their forum. Lots of long time small vendors could not pay the high rates and were not allowed to sell on their forum. RCC was started to allow all members and vendors to sell rotary parts online with ZERO fee's.

Why support a rotary forum who does not support your rotary vendors. We can provide everything that you need here and also when you click refresh the site does not take 20 seconds+ to load.

Welcome to the all #1 all rotary forum. Visit often!

^ I got stooged off that forum cause:

"Your experience and information hinders the sales of other paying vendors and as such is commercially not viable for us"

It's a total arse of a forum

just like fdrx7.com too, run by a select bunch of fuckwits who try to enforce their skewed view of the world upon others and will go to no end to destroy others business too....

This forum here is great

recommend it to your friends and help it grow.

***TitaniumTT*** · 06-07-2010, 09:03 PM

I just got banned for a week for "attacking a forum member"

All I can think was I called a mod naive for commenting on a product that he's never had any experience with

LunchboxCritter · 06-07-2010, 09:49 PM

I thought the "evil forum" got it's nickname because of the hateful responses to threads by members who have read it all, done it all, and know it all. 99% of all threads that I have read start out with a legit problem, and almost immediately someone says, "search, that has already been covered".

I found a member on there that happened to have the ultra rare wind/rain guards and he told me he would take $250 for them. I don't know about anyone else, but that's alot of money to spend on two pieces of injected molded plastic, so I asked to be given a night to think about it. He got mad and said they are not for sale so don't worry about it. What an a$$. <~~~ one of several bad experiences that I had on the "other" forum.

This forum is night/day different from the other. I have yet to encounter a negative or hateful user on here. Many knowledgable and friendly people here. I feel like most of the fellow members on here really love their cars as much as I love mine. There doesn't seem to be people on here who make their living by parting out precious cars for a profit, and bullying people into buying parts for over inflated prices.

lh6601 · 06-07-2010, 11:24 PM

This forum is a 1000 times better than 7club. I can't deal with half the people on that forum. It seems like some of those clowns lurk around waiting for a "newb" rotary enthusiast to start a thread, and then flame the shit out of them for, alot of times, no reason at all. How's that gonna help the rotary community in any way? Fuckin' stupid.

I also love the fact that vendors can advertise for free. How the fuck can you justify raping the pockets of the people who are solely keeping the rotary engine alive?

lh6601 · 06-07-2010, 11:26 PM

Oh, and nice TII by the way. Sucks to see it damaged like that. Glad its recovering.

Phoenix7 · 06-08-2010, 09:04 PM

Quote:

Originally Posted by RICE RACING

^ I got stooged off that forum cause:

"Your experience and information hinders the sales of other paying vendors and as such is commercially not viable for us"

It's a total arse of a forum

just like fdrx7.com too, run by a select bunch of fuckwits who try to enforce their skewed view of the world upon others and will go to no end to destroy others business too....

This forum here is great

recommend it to your friends and help it grow.

haha, amazing, going in my sig now.

***TitaniumTT*** · 06-09-2010, 02:10 AM

Quote:

Originally Posted by RICE RACING

^ I got stooged off that forum cause:

"Your experience and information hinders the sales of other paying vendors and as such is commercially not viable for us"

It's a total arse of a forum

just like fdrx7.com too, run by a select bunch of fuckwits who try to enforce their skewed view of the world upon others and will go to no end to destroy others business too....

This forum here is great

recommend it to your friends and help it grow.

Wait...........

What
The
Fuck???

wow.......

Phoenix7 · 06-09-2010, 02:18 AM

I still can't believe it...they see $$$ and that's it...It's not cheap to run a forum, ask ZGN, but these guys are milking their forums for all they've got. I'm surprised to see the "enthusiasts" on the evil forum put up/ignore this. I guess that as long as "their friends are there" it doesn't matter.

1twistedrx7 · 06-09-2010, 08:01 AM

Quote:

Originally Posted by Phoenix7

I still can't believe it...they see $$$ and that's it...It's not cheap to run a forum, ask ZGN, but these guys are milking their forums for all they've got. I'm surprised to see the "enthusiasts" on the evil forum put up/ignore this. I guess that as long as "their friends are there" it doesn't matter.

god almighty! you should be blessed for speaking the truth.so much less drama over here!

06-05-2010, 03:16 PM	#4
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	Long story short, several years ago 7club was purchased by a large corperation that jacked up vendor rates in the hundreds per month to adversitse on their forum. Lots of long time small vendors could not pay the high rates and were not allowed to sell on their forum. RCC was started to allow all members and vendors to sell rotary parts online with ZERO fee's. Why support a rotary forum who does not support your rotary vendors. We can provide everything that you need here and also when you click refresh the site does not take 20 seconds+ to load. Welcome to the all #1 all rotary forum. Visit often! __________________ Kevin

06-07-2010, 09:03 PM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I just got banned for a week for "attacking a forum member" All I can think was I called a mod naive for commenting on a product that he's never had any experience with __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-07-2010, 09:49 PM	#9
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida iTrader: (0) Posts: 166 Rep Power: 16	I thought the "evil forum" got it's nickname because of the hateful responses to threads by members who have read it all, done it all, and know it all. 99% of all threads that I have read start out with a legit problem, and almost immediately someone says, "search, that has already been covered". I found a member on there that happened to have the ultra rare wind/rain guards and he told me he would take $250 for them. I don't know about anyone else, but that's alot of money to spend on two pieces of injected molded plastic, so I asked to be given a night to think about it. He got mad and said they are not for sale so don't worry about it. What an a$$. <~~~ one of several bad experiences that I had on the "other" forum. This forum is night/day different from the other. I have yet to encounter a negative or hateful user on here. Many knowledgable and friendly people here. I feel like most of the fellow members on here really love their cars as much as I love mine. There doesn't seem to be people on here who make their living by parting out precious cars for a profit, and bullying people into buying parts for over inflated prices. __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!! Last edited by LunchboxCritter; 06-07-2010 at 09:52 PM..

06-07-2010, 11:24 PM	#10
lh6601 Down with OPP Join Date: Mar 2010 iTrader: (0) Posts: 50 Rep Power: 15	This forum is a 1000 times better than 7club. I can't deal with half the people on that forum. It seems like some of those clowns lurk around waiting for a "newb" rotary enthusiast to start a thread, and then flame the shit out of them for, alot of times, no reason at all. How's that gonna help the rotary community in any way? Fuckin' stupid. I also love the fact that vendors can advertise for free. How the fuck can you justify raping the pockets of the people who are solely keeping the rotary engine alive? __________________ 86 base, TII swapped, Rtek 2.1, some other things. Daily driven.

06-07-2010, 11:26 PM	#11
lh6601 Down with OPP Join Date: Mar 2010 iTrader: (0) Posts: 50 Rep Power: 15	Oh, and nice TII by the way. Sucks to see it damaged like that. Glad its recovering. __________________ 86 base, TII swapped, Rtek 2.1, some other things. Daily driven.

06-05-2010, 02:26 PM	#1
Sharingan 19 Rotary Fanatic Join Date: May 2010 iTrader: (0) Posts: 138 Rep Power: 15	Stumbled over from "the evil forum" Certainly not new to rotaries or forums, but I had no idea this one was out there. I see references to "the evil forum" in a large number of threads here....wtf is that about? I'm sure there's a thread somewhere w/ details, but that seems more like lounge material and that's a place I avoid on every forum I frequent so..... Anyways, car is an 87 TII work in progress. A pic from when I was making progress ... After a dumb bitch in a Ford Explorer ran me off the interstate .... On the way back up....

06-05-2010, 03:09 PM	#3
mnrthrt cel=life story Join Date: Apr 2010 Location: blow iTrader: (0) Posts: 32 Rep Power: 0	sux what she did amigo! good lookin car though

06-05-2010, 05:17 PM	#5
hecmanortiz Rotary Fan in Training Join Date: Aug 2009 Location: Hamilton, Ohio iTrader: (0) Posts: 40 Rep Power: 0	I've always wondered but never asked. Good explanation. Thanks Kevin.

06-06-2010, 11:20 AM	#6
RAZOR The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 7 Rep Power: 0	good info. I did no know that story. Nice car too