Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

[EJayCe996]

Originally Posted by TitaniumTT

Nice. What did he do for a fuel rail and how did he punch up the diam from 14 to 16?

I believe he has KG rails, and the 2nd part he didn't mention anything. I haven't seen his car/setup since he got in his M&W ignition/injectors

[helghast7]

alright just scheduled myself in for a tune!! im excited

btw anyone know where i can get a new dashpot? mines dead in the water

[TitaniumTT]

Originally Posted by project86

^^As always.. impressed by your work. Are we sure you arent a robot? The welds on that damn fuel cell are fantastic!

Thanks man, I was pretty much a robot at that point, the sun was coming up when I was doing that welding

Originally Posted by project86

Oh and i dont know if you remember this or not but when i told you i sprayed my paint at 29psi to the cap, i meant 29psi to the gun. That i believe translates to 10psi to the cap. I was just thinkin about that the other day while i was at the paint store looking at guns.

Cool, thanks. I generally run a little more pressure than that esp with the clear. Are you reducing the clear at all to make it lay that flat?

Originally Posted by EJayCe996

I believe he has KG rails, and the 2nd part he didn't mention anything. I haven't seen his car/setup since he got in his M&W ignition/injectors

I've never been overly impressed with the KG rails, then again, I've never been impressed with really any of the aftmkt rails with the exception of one.

He probably just used a bigger o-ring. I was sternly warned about that especially with a boosted engine. I like the Guru rail mainly becuase it has the adapter buckets.

Originally Posted by helghast7

alright just scheduled myself in for a tune!! im excited

Sweet! I got myself a date with Dave as well...... now you guys just need to get to OCC.

Originally Posted by helghast7

btw anyone know where i can get a new dashpot? mines dead in the water

That's a good question. I don't think anyone would part with one of those if they're trying to sell a TB. you MAY have to get a whole new/used TB.

What about that Rotary Works TB? Seriously

[helghast7]

its a thought, im really trying(other then the tune and my splurge on the tail lights lol) not to spend any money for a while on the car, need to save for a beater for the winter because theres no way in hell im driving the fd with any kind of snow on the ground

i think dave said mazda sells them seperate...i guess it would be a good idea to call them lol, darn my laziness at times haha

[MaczPayne]

That's a beautiful fuel cell!

[TitaniumTT]

Originally Posted by helghast7

its a thought, im really trying(other then the tune and my splurge on the tail lights lol) not to spend any money for a while on the car, need to save for a beater for the winter because theres no way in hell im driving the fd with any kind of snow on the ground

i think dave said mazda sells them seperate...i guess it would be a good idea to call them lol, darn my laziness at times haha

I can't remember what that is. I just finished another allnighter, now it's off to a few side jobs before a 10 hr work day.... YAY!!!!!

Originally Posted by MaczPayne

That's a beautiful fuel cell!

Thanks Johnson, it'll be even more beautiful if it works

[EJayCe996]

Originally Posted by TitaniumTT

Thanks Johnson, it'll be even more beautiful if it works

You're TTT...
1. You're always right
2. Fucking always.
3. You never sleep, you just wait with your eyes closed.
4. Everything works
5. Fucking always.
6. You're not an angry person.
*7. You WILL stab someone.

[helghast7]

lol brians like chuck norris, lets make some t shirts haha

[TitaniumTT]

Originally Posted by EJayCe996

You're TTT...
1. You're always right
2. Fucking always.
3. You never sleep, you just wait with your eyes closed.
4. Everything works
5. Fucking always.
6. You're not an angry person.
*7. You WILL stab someone.

what?@!?!?

#3 maybe my favorite

Originally Posted by helghast7

lol brians like chuck norris, lets make some t shirts haha

haahahaah

[helghast7]

btw the dashpot thingy is the piece on the tb that connects to the throttle linkage, it has that movable tongue looking thing that helps slow the plates on a decel

well my tongue thing is not moving...so i need a new one

i wish i had a pic, it would make way more sense

[vex]

lol. Brian, how are you checking your fuel level (via dash. I assume you're just going to use the motec sensor for the signal)? I'm trying to figure out mapping for my car... and I think I have it nailed, but want to see what you do.

[TitaniumTT]

Originally Posted by helghast7

btw the dashpot thingy is the piece on the tb that connects to the throttle linkage, it has that movable tongue looking thing that helps slow the plates on a decel

well my tongue thing is not moving...so i need a new one

i wish i had a pic, it would make way more sense

Negatory, I know exactely what it is. Would the one from your old n/a engine fit?

Originally Posted by vex

lol. Brian, how are you checking your fuel level (via dash. I assume you're just going to use the motec sensor for the signal)? I'm trying to figure out mapping for my car... and I think I have it nailed, but want to see what you do.

Nah, not the MoTeC sensor, that thing is too big and too expensive. Odd you should bring this up, sorry I didn't see it sooner. I was just about to weld the side on my tank when I was going through my checklist - sender - fucker - I dicked around with the stocker for a bit and decided that it would be too much effort to make it fit, so I'm just going to swing by the chandlery tomorrow and pick up a 9" Wema for my 10" deep tank.
http://www.wemausa.com/tank_sensors/...nk_sensors.htm
If the Wema fails, I'll be able to adapt the stock sender into the mounting hole for the Wema so it's a no brainer. Wema for now, and if the Autometer gauge pisses me off.... I will stab it.

[TitaniumTT]

A few pics of the lack of progress I can't wait till I get my first day off in two weeks on Friday. Maybe I'll try to break my 46 hour record

[WE3RX7]

That looks like SHIT

Seriously though... its looking pretty good, just make sure you get ALL the metal shavings out before you seal it up, lol...

[FC3S Murray]

NICE DUDE!!!

Your work is always stellar!

I am going to start a FS thread this weekend so let me know what you want to do with those "items" when you get some free time bro.....no rush.