Deals Gap -For sale thread

9G Redline · 04-14-2010, 01:22 PM

I have a few qts of Idemitsu premix for $6 each. Just PM me so that I can put your name on them.

Acesanugal · 04-14-2010, 11:23 PM

Although I am not attending this year, my good friend Kristy (Red FC Pre-Production) will be bringing some of my stuff for sale..

S5 'Vert tails, good shape, includes license plate trim - $150
S4 sport aero package side spoilers - $150
A/C Logicon As-is, not sure if it works (Should) - $50
I believe I threw in two wiper switches and two headlight switches. I know the headlight switches work, and I know one of the wiper switches works properly..the other wiper switch only works on the typical low speed.. It is the one with no side cover (Exposed PCB). Headlight switches are $35 each, the allegedly good wiper switch is $40 and the one that only works on low is $25.

864angel112 · 04-15-2010, 09:18 AM

Quote:

Originally Posted by fire85gslse

it would be really cool if there was an area that people could meet to buy/sell.
Our own rotary swap meet area, how cool would that be.

yes i would bring a truck load of parts

fire85gslse · 04-15-2010, 10:44 AM

FD Black leather Seats in A+ shape (from my 38K mile FD)
$700 cash

New Konig Rewinds 15x7 with good used rubber (3/4) 205's
Gun gray with polished lip 4x110
$700

N.RotaryTech · 04-15-2010, 01:58 PM

I'm bringing a box of some internal/external engine parts, (I will list below).

I'm not bringing the the housings or irons, unless someone posts that they want one of them or more.
Like I stated before, the housings/irons, most of them are in bad shape, so I figure most ppl would not care for them.
But unless you want something ill bring it.

List of engine parts: (all parts have been cleaned.)
$30 > Oil pan (good condition, a few scratches on bottom.)
$60 > Front cover (good condition)
$25 > Front Stationary Gear (light surface rust)
$25 > Rear Stationary Gear (light surface rust)
$40 > Oil Pump (made sure still lubed)
$10 > Front Counter Weight
$5 > Oil Pump Chain (made sure still lubed)
$5 > Oil pressure Regulator (made sure still lubed)
$5(ea.) > Drive gears, flywheel nut
$1(ea.) > Thrust washers, Spacers, Plates
$1(ea.) > Dowel Pins
$5(set) > Tension Bolts

Rotor parts:
$25 > Compression seal set
$25 > Oil ring carriers
$10 > Oil ring springs
$10 > O-rings

Also bringing some other items:
$25(ea.) > Rear Hatch Shocks (from a GXL)
$5 > Gauge cluster plastic cover (houses the lights, wiper, blinker, etc. switches)

04-14-2010, 01:22 PM	#16
9G Redline Rotary Fan in Training Join Date: Feb 2009 iTrader: (0) Posts: 61 Rep Power: 16	I have a few qts of Idemitsu premix for $6 each. Just PM me so that I can put your name on them. __________________ Original owner of a 04 WB Rx8 6spd Touring. Mazdaspeed CAI, MS Dual Catback, Voodoo knob, Boston Audio, AP Pulley, Rotora slotted rotors w/ Hawk HPS pads. 2nd engine @ 83,147 miles. Second owner 2005 Mazda 3 5-speed (Traded) 1st owner 2010 Black Mazda Mx-5 6-speed with PRHT. More mods and rotaries to come!

04-15-2010, 10:44 AM	#19
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN iTrader: (0) Posts: 1,029 Rep Power: 18	FD Black leather Seats in A+ shape (from my 38K mile FD) $700 cash New Konig Rewinds 15x7 with good used rubber (3/4) 205's Gun gray with polished lip 4x110 $700 Attached Thumbnails __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit) Last edited by fire85gslse; 04-15-2010 at 01:25 PM..

04-15-2010, 01:58 PM	#20
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC iTrader: (0) Posts: 552 Rep Power: 17	Internal engine / block parts. S5 NA I'm bringing a box of some internal/external engine parts, (I will list below). I'm not bringing the the housings or irons, unless someone posts that they want one of them or more. Like I stated before, the housings/irons, most of them are in bad shape, so I figure most ppl would not care for them. But unless you want something ill bring it. List of engine parts: (all parts have been cleaned.) $30 > Oil pan (good condition, a few scratches on bottom.) $60 > Front cover (good condition) $25 > Front Stationary Gear (light surface rust) $25 > Rear Stationary Gear (light surface rust) $40 > Oil Pump (made sure still lubed) $10 > Front Counter Weight $5 > Oil Pump Chain (made sure still lubed) $5 > Oil pressure Regulator (made sure still lubed) $5(ea.) > Drive gears, flywheel nut $1(ea.) > Thrust washers, Spacers, Plates $1(ea.) > Dowel Pins $5(set) > Tension Bolts Rotor parts: $25 > Compression seal set $25 > Oil ring carriers $10 > Oil ring springs $10 > O-rings Also bringing some other items: $25(ea.) > Rear Hatch Shocks (from a GXL) $5 > Gauge cluster plastic cover (houses the lights, wiper, blinker, etc. switches) __________________ '89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily. Last edited by N.RotaryTech; 04-15-2010 at 02:35 PM.. Reason: Items added.

04-14-2010, 11:23 PM	#17
Acesanugal Completely Insane... Join Date: Apr 2008 Location: Burlington, Vermont iTrader: (0) Posts: 7 Rep Power: 0	Although I am not attending this year, my good friend Kristy (Red FC Pre-Production) will be bringing some of my stuff for sale.. S5 'Vert tails, good shape, includes license plate trim - $150 S4 sport aero package side spoilers - $150 A/C Logicon As-is, not sure if it works (Should) - $50 I believe I threw in two wiper switches and two headlight switches. I know the headlight switches work, and I know one of the wiper switches works properly..the other wiper switch only works on the typical low speed.. It is the one with no side cover (Exposed PCB). Headlight switches are $35 each, the allegedly good wiper switch is $40 and the one that only works on low is $25.