Anyone that's going to DGRR interested in an exhaust?

daleclark · 01-12-2010, 11:38 AM

Hey guys -

Getting STOKED about going to DGRR! Finally getting the car back in one piece, it will be looking GOOD for the event!

I had a thought - I have a LOT of FD cat-back exhausts in my garage that I've dragged my butt on selling. Since there will be a lot of RX-7 guys in one place, I figure I could haul one or maybe two up if anyone is wanting to buy one. Only limiting factor is how much I can fit in the back of an FD with 2 people and luggage

.

I have -

- Apexi N1
- Tanabe Racing Medallion
- Turbo Tuf (this is an OLD SCHOOL US exhaust, sounds good too)
- ATR (again, old school US)
- Generic Ebay N1-style cat back
- Resonated midpipe (I think it's an ATR)
- Straight midpipe
- Unknown downpipe

I'd probably be looking to do $150 each on the exhausts and resonated midpipe, $75 each on the downpipe and plain midpipe.

Again, this is me hauling them up to DGRR, I'm not wanting to ship them right now. Thinking about it, I might be able to bring a couple if I can talk other local guys that are going into donating some hatch space

.

I can give more specifics on each one as well.

Thanks!
Dale

***Herblenny*** · 01-12-2010, 11:57 AM

Dale, post up some pictures.. I might be interested in one

daleclark · 01-12-2010, 08:42 PM

I'll get some pics up soon, gotta do a lineup.

BTW, the FD drove around tonight for the first time in 4 months or so

. ZERO traction in this weather!

Dale

***Herblenny*** · 01-12-2010, 09:13 PM

Can't wait to see your FD Dale! I'm always amazed at what you did to your FD.

ObliqueFD · 01-12-2010, 11:40 PM

I might be interested in one. I am picking up a roller without an exhaust this weekend. But I am also not 100% certain I can make it to DGRR yet.

Rotorypolo · 01-13-2010, 01:47 PM

Dale, hope you are doing well, its been a min. I am looking forward to DGRR and see you and your sweet FD again.
Marco

daleclark · 01-20-2010, 04:50 PM

OK, FINALLY got off my butt and took some pics. These are all of them kinda dirty, they will be cleaned and buffed/polished for whoever wants them.

Head here for the Photobucket album -

http://s984.photobucket.com/albums/a.../Exhaust%20FS/

Some notes -

- Tanabe Racing Medallion. Very slim muffler, sticks out a bit from the back bumper. It does have the usual scuffs on the bottom. Actually is not that loud, I thought it would be way loud but it sounds really good.

- Apexi N1. You guys know this one. A scrape on the bottom removed the plate that says it's an N1. I've done some sanding/polishing on the main can, and with a final buff it will look VERY good. The piping has been repainted with high temp silver paint, it discolored to gold a bit.

- Motoria. I think this is an Ebay cat-back. It's actually in damn near new condition, I traded a guy for it, he ran it for like a month or something.

- Turbo Tuf. This is an OLD SCHOOL US made cat-back. Uses the stock muffler bracket to mount, I'm including one with it. Big 5" tip, sounds VERY good. On the loud side, as are most US cat-backs. I almost thought about welding a different tip on and running it, it sounds great.

- ATR. Another old school US made cat-back. Also uses the stock muffler bracket, but "twists" it up so you don't see it, nice design. VERY loud. Has really good ground clearance, it's generaly in really good shape.

- Resonated midpipe. Not sure who made it, it's in good shape, no rattles or anything, good fit, etc.

- Plain midpipe. It's mild steel, I think it's from ATR. Surface rust of course, you could Jet-Hot it and have it look brand new.

- Unknown downpipe. Has a JDM-style head, welded from sections. NO idea who made it, does seem to be decent quality. Also mild steel.

Oh, not pictured, but I do have a Bonez downpipe that I discovered

. Stainless, good shape with some discoloration. The mount to bolt it to the transmission is bent downwards, but I never use that mount anyhow

.

If you guys need better pics or more info, let me know. I can probably fit 2 or so exhausts in the back of the FD, if more I might be able to talk other people around here into hauling one up for me.

Thanks!
Dale

daleclark · 01-22-2010, 11:40 AM

Anyone?

Dale

daleclark · 01-25-2010, 11:01 PM

OK, the N1 has dibs on it, and I've got interest in the resonated midpipe.

Dale

daleclark · 01-28-2010, 05:10 PM

Just sold and shipped the N1 and the Bonez midpipe. Dude had to pay more because he didn't get the in-person delivery that DGRRXX folks will get

Dale

01-12-2010, 11:38 AM	#1
daleclark RX-7 Bad Ass Join Date: Sep 2008 Location: Pensacola, FL iTrader: (0) Posts: 105 Rep Power: 17	Anyone that's going to DGRR interested in an exhaust? Hey guys - Getting STOKED about going to DGRR! Finally getting the car back in one piece, it will be looking GOOD for the event! I had a thought - I have a LOT of FD cat-back exhausts in my garage that I've dragged my butt on selling. Since there will be a lot of RX-7 guys in one place, I figure I could haul one or maybe two up if anyone is wanting to buy one. Only limiting factor is how much I can fit in the back of an FD with 2 people and luggage . I have - - Apexi N1 - Tanabe Racing Medallion - Turbo Tuf (this is an OLD SCHOOL US exhaust, sounds good too) - ATR (again, old school US) - Generic Ebay N1-style cat back - Resonated midpipe (I think it's an ATR) - Straight midpipe - Unknown downpipe I'd probably be looking to do $150 each on the exhausts and resonated midpipe, $75 each on the downpipe and plain midpipe. Again, this is me hauling them up to DGRR, I'm not wanting to ship them right now. Thinking about it, I might be able to bring a couple if I can talk other local guys that are going into donating some hatch space . I can give more specifics on each one as well. Thanks! Dale

01-12-2010, 11:57 AM	#2
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Dale, post up some pictures.. I might be interested in one __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

01-12-2010, 09:13 PM	#4
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Can't wait to see your FD Dale! I'm always amazed at what you did to your FD. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

01-12-2010, 11:40 PM	#5
ObliqueFD Rotary Fan in Training Join Date: Feb 2008 Location: Lancaster, Ohio iTrader: (0) Posts: 53 Rep Power: 17	I might be interested in one. I am picking up a roller without an exhaust this weekend. But I am also not 100% certain I can make it to DGRR yet. __________________ '93 SSM RX-7 '93 BB RX-7 '04 BB RX-8

01-13-2010, 01:47 PM	#6
Rotorypolo Rotary Fanatic Join Date: Jul 2008 Location: ATL iTrader: (0) Posts: 116 Rep Power: 17	Dale, hope you are doing well, its been a min. I am looking forward to DGRR and see you and your sweet FD again. Marco __________________ 1994 RX-7 PEP - (SOLD) 1993 RX-7 R1 - (under the knife) 1973 RX-3 13b 5 speed (DGRR 2011- 1st in class)

01-12-2010, 08:42 PM	#3
daleclark RX-7 Bad Ass Join Date: Sep 2008 Location: Pensacola, FL iTrader: (0) Posts: 105 Rep Power: 17	I'll get some pics up soon, gotta do a lineup. BTW, the FD drove around tonight for the first time in 4 months or so . ZERO traction in this weather! Dale

01-20-2010, 04:50 PM	#7
daleclark RX-7 Bad Ass Join Date: Sep 2008 Location: Pensacola, FL iTrader: (0) Posts: 105 Rep Power: 17	OK, FINALLY got off my butt and took some pics. These are all of them kinda dirty, they will be cleaned and buffed/polished for whoever wants them. Head here for the Photobucket album - http://s984.photobucket.com/albums/a.../Exhaust%20FS/ Some notes - - Tanabe Racing Medallion. Very slim muffler, sticks out a bit from the back bumper. It does have the usual scuffs on the bottom. Actually is not that loud, I thought it would be way loud but it sounds really good. - Apexi N1. You guys know this one. A scrape on the bottom removed the plate that says it's an N1. I've done some sanding/polishing on the main can, and with a final buff it will look VERY good. The piping has been repainted with high temp silver paint, it discolored to gold a bit. - Motoria. I think this is an Ebay cat-back. It's actually in damn near new condition, I traded a guy for it, he ran it for like a month or something. - Turbo Tuf. This is an OLD SCHOOL US made cat-back. Uses the stock muffler bracket to mount, I'm including one with it. Big 5" tip, sounds VERY good. On the loud side, as are most US cat-backs. I almost thought about welding a different tip on and running it, it sounds great. - ATR. Another old school US made cat-back. Also uses the stock muffler bracket, but "twists" it up so you don't see it, nice design. VERY loud. Has really good ground clearance, it's generaly in really good shape. - Resonated midpipe. Not sure who made it, it's in good shape, no rattles or anything, good fit, etc. - Plain midpipe. It's mild steel, I think it's from ATR. Surface rust of course, you could Jet-Hot it and have it look brand new. - Unknown downpipe. Has a JDM-style head, welded from sections. NO idea who made it, does seem to be decent quality. Also mild steel. Oh, not pictured, but I do have a Bonez downpipe that I discovered . Stainless, good shape with some discoloration. The mount to bolt it to the transmission is bent downwards, but I never use that mount anyhow . If you guys need better pics or more info, let me know. I can probably fit 2 or so exhausts in the back of the FD, if more I might be able to talk other people around here into hauling one up for me. Thanks! Dale

01-22-2010, 11:40 AM	#8
daleclark RX-7 Bad Ass Join Date: Sep 2008 Location: Pensacola, FL iTrader: (0) Posts: 105 Rep Power: 17	Anyone? Dale

01-25-2010, 11:01 PM	#9
daleclark RX-7 Bad Ass Join Date: Sep 2008 Location: Pensacola, FL iTrader: (0) Posts: 105 Rep Power: 17	OK, the N1 has dibs on it, and I've got interest in the resonated midpipe. Dale

01-28-2010, 05:10 PM	#10
daleclark RX-7 Bad Ass Join Date: Sep 2008 Location: Pensacola, FL iTrader: (0) Posts: 105 Rep Power: 17	Just sold and shipped the N1 and the Bonez midpipe. Dude had to pay more because he didn't get the in-person delivery that DGRRXX folks will get Dale