FC3S Murray's never ending build.

MaczPayne · 12-17-2009, 07:17 PM

You know you want to come back here!

FC3S Murray · 12-18-2009, 12:35 AM

Quote:

Originally Posted by MaczPayne

You know you want to come back here!

Yeah for Sevenstock and In and Out.....thats it

FC3S Murray · 12-19-2009, 05:30 PM

So the SSR's sold today and left on a UPS truck to their new home!!

Working on the VS-XX's with the seller. Sounds like it is for sure. YES!!

FC3S Murray · 12-24-2009, 06:12 PM

Little Update:

So I ended up getting a sweet deal on some 17''x8 +28, 17''x9 +29 WORK EQUIPS. I liked the VS-XX's BUT the Equips are just to sweet!! I should be getting them by Tuesday.

Now I am in the process of deciding what series of tire I want to get. It is a pickle due to how much fender gap I want with these new shoes.

I am up in the air with either 40 or 45 series tires. 45's will fill my wheel wells perfect with my current Tokico/gf210 set up BUT will probably feel sloppy. 40's will be stiff BUT will leave a slighlty larger gap in my fenders....I am most likely just gonna get coilovers this tax season so this may be all in vain lol.

Meanwhile today I decided I am gonna need to roll my fenders regardless if I ever lower this FC more. Went at it this morning with a heat gun and rubber body mallet................

Passenger side went GREAT with no cracking.

The driverside was a **** and already had a "bite" in the fender lip that caused a small 2mm crack this last summer. I knew the crack was gonna spread and sure as shit it grew about 2''....

Here is the crack after I touched it up(my ocd couldn't let this fly though...

)

SOOOOOOOOO then I said screw it and got out some 2000 grit and wet sanded that damn crack, applies some touch up, then some rubbing compound, then a heavy coat of 3M Hand Glaze followed by a little more touch up paint. Turned out GREAT and is barely noticable.

As for tires I am thinking about Nitto NT555's or Falken FK425's. If ANYONE knows of other street Ultra HP tires, please fill me in.

Will post pics of the wheels as soon as they get here.

MaczPayne · 12-25-2009, 05:28 AM

Federal 595RSR's are decently priced and perform quite well.

As for fender rolling, I pulled mine out a little more today, the paint cracked big time where the bondo was.

***TitaniumTT*** · 12-26-2009, 02:36 PM

Nice job Sean, I demand pics ASAP.

I think I'm just gonna roll the fenders in the FD before I even spray primer

FC3S Murray · 12-26-2009, 02:41 PM

Quote:

Originally Posted by TitaniumTT

Nice job Sean, I demand pics ASAP.

I think I'm just gonna roll the fenders in the FD before I even spray primer

Thanks man! I would roll them before too. It would be less stressful then doing it with new paint. I was pretty pissed it cracked but whatever...it is just a car and I would rather have a small paint imperfection then a chewed up fender from a tire.

WE3RX7 · 12-27-2009, 01:53 AM

Quote:

Originally Posted by EJayCe996

Gold on blue is too Subie for me.

You'll hate my FC then

Get some pics up of the wheels when you get them. What color did you end up going with on the wheels you got the deal on?

17x8 +28 huh.... you shouldnt have too much rubbing issues up front... but rolling the fenders is definitely a safe bet. Looks good man!

***TitaniumTT*** · 12-27-2009, 10:57 AM

17x8 +28 should look awesome. I'm running 17x8+35 and there is a less offset that could be there. I've always thought of running a small 5-7 mm spacer to bump them out just a touch more. I love that perfect flush look and the benefit of the FC's suspension is that it will tuck into the well upon compression.

FC3S Murray · 12-27-2009, 05:56 PM

Quote:

Originally Posted by WE3RX7

Get some pics up of the wheels when you get them. What color did you end up going with on the wheels you got the deal on?

17x8 +28 huh.... you shouldnt have too much rubbing issues up front... but rolling the fenders is definitely a safe bet. Looks good man!

They are silver. I will decide if I want to make them a gloss graphrite once I see how silver looks on my Blue.

Yeah I figured rubbing wouldn't be an issue with that offset BUT I have a 5mm spacer just in case

I am hoping I rolled my fenders enough, i didn't fold the fender lip completely against the inner fender due to really cracking the paint BUT trust me it is folded damn good. Plus I only did a "very tight fold" from one red point to the other on the picture.

Is that enough?? ...we will have to wait and see.

FC3S Murray · 12-27-2009, 06:02 PM

Quote:

Originally Posted by TitaniumTT

17x8 +28 should look awesome. I'm running 17x8+35 and there is a less offset that could be there. I've always thought of running a small 5-7 mm spacer to bump them out just a touch more. I love that perfect flush look and the benefit of the FC's suspension is that it will tuck into the well upon compression.

Cool! I hope they look good

EJayCe996 · 12-27-2009, 07:13 PM

Quote:

Originally Posted by WE3RX7

You'll hate my FC then

Doubt it

project86 · 01-07-2010, 03:13 PM

sean! pics of wheels!

FC3S Murray · 01-07-2010, 04:49 PM

Hold on MoFo! I have one more lip to sand and polish. I am awaiting my newly powder coated/cleared centers from Big Sky Perfromance Coatings. PLUS I need to strip the old ass RTV from the rims and polish/clean the 148 bolts!!

Needless to say I should have hit up the "refurbish" option when I had the chance.

Fuck it, I saved 300.00$....just lost most of my fingerprints from sanding.

In due time my friends lol

***TitaniumTT*** · 01-07-2010, 06:15 PM

Quote:

Originally Posted by FC3S Murray

Fuck it, I saved 300.00$....just lost most of my fingerprints from sanding.

That's not all a bad thing

I lost alot of definition from metal working and general calases. I've been fingerprinted three times now and each time the dude made some snyde remark

12-17-2009, 07:17 PM	#316
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	You know you want to come back here! __________________ Johnson TA FC in the works!

12-19-2009, 05:30 PM	#318
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana iTrader: (3) Posts: 611 Rep Power: 16	So the SSR's sold today and left on a UPS truck to their new home!! Working on the VS-XX's with the seller. Sounds like it is for sure. YES!! __________________ Same pig, new soul

12-24-2009, 06:12 PM	#319
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana iTrader: (3) Posts: 611 Rep Power: 16	Little Update: So I ended up getting a sweet deal on some 17''x8 +28, 17''x9 +29 WORK EQUIPS. I liked the VS-XX's BUT the Equips are just to sweet!! I should be getting them by Tuesday. Now I am in the process of deciding what series of tire I want to get. It is a pickle due to how much fender gap I want with these new shoes. I am up in the air with either 40 or 45 series tires. 45's will fill my wheel wells perfect with my current Tokico/gf210 set up BUT will probably feel sloppy. 40's will be stiff BUT will leave a slighlty larger gap in my fenders....I am most likely just gonna get coilovers this tax season so this may be all in vain lol. Meanwhile today I decided I am gonna need to roll my fenders regardless if I ever lower this FC more. Went at it this morning with a heat gun and rubber body mallet................ Passenger side went GREAT with no cracking. The driverside was a **** and already had a "bite" in the fender lip that caused a small 2mm crack this last summer. I knew the crack was gonna spread and sure as shit it grew about 2''.... Here is the crack after I touched it up(my ocd couldn't let this fly though...) SOOOOOOOOO then I said screw it and got out some 2000 grit and wet sanded that damn crack, applies some touch up, then some rubbing compound, then a heavy coat of 3M Hand Glaze followed by a little more touch up paint. Turned out GREAT and is barely noticable. As for tires I am thinking about Nitto NT555's or Falken FK425's. If ANYONE knows of other street Ultra HP tires, please fill me in. Will post pics of the wheels as soon as they get here. __________________ Same pig, new soul

12-25-2009, 05:28 AM	#320
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal iTrader: (1) Posts: 442 Rep Power: 17	Federal 595RSR's are decently priced and perform quite well. As for fender rolling, I pulled mine out a little more today, the paint cracked big time where the bondo was. __________________ Johnson TA FC in the works!

12-26-2009, 02:36 PM	#321
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Nice job Sean, I demand pics ASAP. I think I'm just gonna roll the fenders in the FD before I even spray primer __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-27-2009, 10:57 AM	#324
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	17x8 +28 should look awesome. I'm running 17x8+35 and there is a less offset that could be there. I've always thought of running a small 5-7 mm spacer to bump them out just a touch more. I love that perfect flush look and the benefit of the FC's suspension is that it will tuck into the well upon compression. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-07-2010, 03:13 PM	#328
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	sean! pics of wheels! __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

01-07-2010, 04:49 PM	#329
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana iTrader: (3) Posts: 611 Rep Power: 16	Hold on MoFo! I have one more lip to sand and polish. I am awaiting my newly powder coated/cleared centers from Big Sky Perfromance Coatings. PLUS I need to strip the old ass RTV from the rims and polish/clean the 148 bolts!! Needless to say I should have hit up the "refurbish" option when I had the chance. Fuck it, I saved 300.00$....just lost most of my fingerprints from sanding. In due time my friends lol __________________ Same pig, new soul Last edited by FC3S Murray; 01-07-2010 at 04:53 PM..